Conventional microheat sink design primarily focuses on the use of continuous fin arrays to optimally dissipate thermal energy from electronic components. By contrast, this paper experimentally measures the thermal and structural performance of two micro pin fin heat sinks designed for use in load bearing applications such as mechanical seals and thrust bearings. One pin fin array is of low porosity, which is more optimal for load bearing capacity, and the other is of high porosity, which is more optimal for heat dissipation. By using these two extreme cases, the thermal-structural tradeoff found in load bearing microheat sinks is demonstrated. The heat sinks are constructed of nickel, electrodeposited onto a stainless steel thrust ring using a modified LIGA technique. Under forced air cooling, the thermal performance of each is compared to a simple model based on a combination of macroscale pin fin heat sink results and classical correlations for fins in cross flow The low porosity design is also tested under the application of a 44.5 N thrust load at 2500 rpm and found to be structurally sound. Experimental temperature profiles demonstrate a substantial benefit of the microheat sink in cooling the load bearing surface.
