Prediction of fatigue crack growth rates using crack closure finite element analysis

被引：15
|
作者：
Alizadeh, Hassan [1 ]
Simandjuntak, Sarinova [1 ]
Smith, David [1 ]
Pavier, Martyn [1 ]
机构：
[1] Univ Bristol, Dept Mech Engn, Bristol BS8 1TR, Avon, England
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2007年 / 29卷 / 9-11期
基金：
英国工程与自然科学研究理事会;
关键词：
stress intensity factor range; fatigue crack growth rate; crack closure; finite element analysis;
D O I：
10.1016/j.ijfatigue.2006.12.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A three-dimensional finite element fatigue crack closure model of a corner crack and of a through thickness crack has been developed to evaluate the range of effective stress intensity factor from the distribution of the range of stress ahead of the crack tip. The corresponding fatigue crack growth rate was evaluated from a Paris law fit to experimental data from high stress ratio tests. The point of origin for the range of stress distribution was adjusted in accordance with Irwin's plastic zone correction. Encouraging comparisons of finite element predictions of fatigue crack growth rate incorporating closure effects with experimental measurements were obtained. (C) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1711 / 1715
页数：5
相关论文
共 50 条
  • [1] Three dimensional finite element prediction of crack closure and fatigue crack growth rate for a corner crack
    Simandjuntak, S
    Alizadeh, H
    Smith, DJ
    Pavier, MJ
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (04) : 335 - 345
  • [2] Fatigue crack closure determination by means of finite element analysis
    Zapatero, J.
    Moreno, B.
    Gonzalez-Herrera, A.
    [J]. ENGINEERING FRACTURE MECHANICS, 2008, 75 (01) : 41 - 57
  • [3] Crack closure and microstructurally short fatigue crack growth rates
    Gall, K
    Sehitoglu, H
    [J]. ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, 1997, : 1475 - 1482
  • [4] FATIGUE CRACK GROWTH ANALYSIS IN PIPE FITTINGS USING FINITE ELEMENT ANALYSIS
    Radhakrishnan, Harish
    Manuel, Jacob
    [J]. PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 2, 2023,
  • [5] Prediction of fatigue crack initiation life in railheads using finite element analysis
    El-sayed, H. M.
    Lotfy, M.
    Zohny, H. N. El-din
    Riad, H. S.
    [J]. AIN SHAMS ENGINEERING JOURNAL, 2018, 9 (04) : 2329 - 2342
  • [6] Predicting creep-fatigue crack growth rates in Alloy 709 using finite element simulations of plasticity and creep-induced crack closure
    Ramirez, Jose
    Potirniche, Gabriel P.
    Pugesek, Henry
    Shaber, Nicholas
    Taylor, Martin
    Stephens, Robert
    Charit, Indrajit
    [J]. 12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018), 2018, 165
  • [7] Finite element analysis of fatigue crack closure: A historical and critical review
    McClung, RC
    [J]. FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 495 - 502
  • [8] Modeling of fatigue crack closure by finite element method
    Ding, Zhenyu
    Wang, Xiaogui
    Gao, Zengliang
    [J]. ADVANCES IN PRODUCT DEVELOPMENT AND RELIABILITY III, 2012, 544 : 145 - +
  • [9] ANALYSIS OF CLOSURE IN FATIGUE CRACK GROWTH
    BUDIANSKY, B
    HUTCHINSON, JW
    [J]. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1978, 45 (02): : 267 - 276
  • [10] The prediction of fatigue crack opening behavior using cyclic crack tip opening displacement by finite element analysis
    Choi, Hyeon Chang
    [J]. FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 295 - 298
12345