Toughness of Advanced High Strength Bainitic Steels

被引：10
|
作者：
Caballero, F. G. [1 ]
Chao, J. [1 ]
Cornide, J. [1 ]
Garcia-Mateo, C. [1 ]
Santofimia, M. J. [2 ,3 ]
Capdevila, C. [1 ]
机构：
[1] CSIC, CENIM, Dept Met Phys, Avda Gregorio Amo 8, E-28040 Madrid, Spain
[2] Netherlands Inst Metals Res, NL-2628 CD Delft, Netherlands
[3] Delft Univ Technol, Dept Mat Sci & Engn, NL-2628 CD Delft, Netherlands
来源：
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词：
toughness; coalesced bainite; steels; COMPOSITION PROPERTY APPROACH; SILICON STEELS; PART; DESIGN; CARBON;
D O I：
10.4028/www.scientific.net/MSF.638-642.118
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Carbide free bainite has achieved the highest strength and toughness combinations to date for bainitic steels in as-rolled conditions By alloying designing and with the help of phase transformation theory, It was possible to improve simultaneously the strength and toughness because of the ultra-fine grain size of the bainitic ferrite plates Ultimate tensile strengths ranging from 1600 MPa to 1800 MPa were achieved while keeping a total elongation higher than 10 %. Their toughness at room temperature matches tempered martensitic steels, known to be the best-in-class regarding this property. However, it has been observed that the presence of coalesced bainite leads to a dramatic deterioration in toughness in these novel high strength bainitic steels.
引用
下载
收藏
页码：118 / +
页数：2
相关论文
共 50 条
  • [1] Toughness deterioration in advanced high strength bainitic steels
    Caballero, F. G.
    Chao, J.
    Cornide, J.
    Garcia-Mateo, C.
    Santofimia, M. J.
    Capdevila, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 525 (1-2): : 87 - 95
  • [2] Advanced ultra high strength bainitic steels
    Caballero, F. G.
    Garcia-Mateo, C.
    Capdevila, C.
    de Andres, C. Garcia
    MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (04) : 502 - 506
  • [3] Advanced ultra-low carbon bainitic steels with high toughness
    Lis, AK
    Lis, J
    Jeziorski, L
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 64 (1-3) : 255 - 266
  • [4] Viewpoints on Technological Aspects of Advanced High-Strength Bainitic Steels
    Morales-Rivas, Lucia
    METALS, 2022, 12 (02)
  • [5] Microstructural effects on the fracture toughness of advanced high strength steels
    Wu, Zhanfang
    Liu, Zhenyu
    Li, Xiangyang
    MATERIALS LETTERS, 2020, 271
  • [6] Friction stir welding of advanced high strength (bainitic) steels for automotive applications
    Ramakrishna, V. S. M. R.
    Rao, K. Bhanu Sankara
    Reddy, G. Madhusudan
    Gautam, Jai Prakash
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17139 - 17146
  • [7] The effect of Si on the toughness of high strength Mn-Si-Cr series bainitic steels
    Tan, ZL
    Bai, BZ
    Fang, HS
    Yang, FB
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 213 - 216
  • [8] Novel Approach of Nanostructured Bainitic Steels' Production with Improved Toughness and Strength
    Kirbis, Peter
    Anzel, Ivan
    Rudolf, Rebeka
    Bruncko, Mihael
    MATERIALS, 2020, 13 (05)
  • [9] Ultra-high-strength bainitic steels
    Garcia-Mateo, C
    Caballero, FG
    ISIJ INTERNATIONAL, 2005, 45 (11) : 1736 - 1740
  • [10] Toughness variations in nanostructured bainitic steels
    Avishan, Behzad
    Yazdani, Sasan
    Nedjad, Syamak Hossein
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 548 : 106 - 111
12345