Creep-fatigue interaction behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure

被引：14

作者：

Sandhya, R ^{[1
]}

Rao, KBS ^{[1
]}

Mannan, SL ^{[1
]}

机构：

[1] Indira Gandhi Ctr Atom Res, Mat Dev Grp, Kalpakkam 603102, Tamil Nadu, India

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 392卷 / 1-2期

关键词：

Ti modified stainless steel; creep-fatigue interaction; low cycle fatigue; microstructure; precipitation; cold work;

D O I：

10.1016/j.msea.2004.09.040

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The creep-fatigue interaction behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel has been characterized as a function of Ti/C ratio and microstructure. Creep-fatigue interaction behaviour has been investigated in this material, by introducing hold times with durations ranging from 1 to 10 min at peak tensile strain. The material was tested at 923 K in Ti/C ratios of 4 and 8 and in the solution annealed, cold worked and aged conditions. It has been ascertained that precipitation controls creep-fatigue interaction properties in this alloy. Carbides which precipitate on the grain boundaries in the solution annealed material are found to be beneficial to creep-fatigue interaction properties, while fine titanium carbides which precipitate in the matrix in cold worked and aged conditions of the alloy, have been found detrimental to creep-fatigue interaction properties. (C) 2004 Elsevier B.V. All rights reserved.

引用

页码：326 / 334

页数：9

共 50 条

[1] The effect of prior microstructure on the low cycle fatigue behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel
Sandhya, R
Rao, KBS
Mannan, SL
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2005, 58 (2-3) : 303 - 308
[2] Effect of Ti/C ratio on temperature dependence of low cycle fatigue behaviour of 15Cr-15Ni titanium modified austenitic stainless steel
Sandhya, R
Rao, KBS
Mannan, SL
MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (02) : 178 - 184
[3] The effect of temperature and Ti/C ratio on the LCF properties of a 15Cr-15Ni, Ti modified stainless steel
Sandhya, R
Bhanu, K
Rao, S
Mannan, SL
FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 2189 - 2194
[4] The effect of temperature on the low cycle fatigue properties of a 15Cr-15Ni, Ti modified austenitic stainless steel
Sandhya, R
Rao, KBS
Mannan, SL
Devanathan, R
SCRIPTA MATERIALIA, 1999, 41 (09) : 921 - 927
[5] Creep properties of 15Cr-15Ni austenitic stainless steel and the influence of titanium
Latha, S
Mathew, MD
Rao, KBS
Mannan, SL
CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2001, : 507 - 513
[6] ACTIVATION-ENERGY FOR SERRATED FLOW IN A 15CR-15NI TI-MODIFIED AUSTENITIC STAINLESS-STEEL
VENKADESAN, S
PHANIRAJ, C
SIVAPRASAD, PV
RODRIGUEZ, P
ACTA METALLURGICA ET MATERIALIA, 1992, 40 (03): : 569 - 580
[7] EFFECT OF TI/C RATIO AND PRIOR COLD WORK ON THE TENSILE PROPERTIES OF 15CR-15NI-2.2HO-TI MODIFIED AUSTENITIC STAINLESS-STEEL
VENKADESAN, S
SIVAPRASAD, PV
VASUDEVAN, M
VENUGOPAL, S
RODRIGUEZ, P
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1992, 45 (01): : 57 - 68
[8] Influence of Ti/(C+6/7N) ratio on the recrystallization behaviour of a cold worked 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel
Vasudevan, M
Venkadesan, S
Sivaprasad, PV
JOURNAL OF NUCLEAR MATERIALS, 1996, 231 (03) : 231 - 241
[9] Effect of Phosphorous Content on the Microstructure and Stress Rupture Properties of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel
Qiao, Yufei
Liang, Tian
Chen, Sihan
Ren, Yuanyuan
Liu, Chunming
Qi, Yue
Ma, Yingche
Liu, Kui
CRYSTALS, 2023, 13 (04)
[10] Creep behaviour of 14Cr-15Ni-Ti stainless steel at 923 K
Latha, S.
Mathew, M. D.
Parameswaran, P.
Rao, K. Bhanu Sankara
Mannan, S. L.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (20): : 5167 - 5174

← 1 2 3 4 5 →