Three-dimensional thermo-fluid and electrochemical modeling of anode-supported planar solid oxide fuel cell

This paper presents a three-dimensional model of an anode-supported planar solid oxide fuel cell with corrugated bipolar plates serving as gas channels and current collector above the active area of the cell. Conservation equations of mass, momentum, energy and species are solved incorporating the electrochemical reactions. Heat transfer due to conduction, convection and radiation is included. An empirical equation for cell resistance with measured values for different parameters is used for the calculations. Distribution of temperature and gas concentrations in the PEN (positive electrode/electrolyte/negative electrode) structure and gas channels are investigated. Variation of current density over the cell is studied. Furthermore, the effect of radiation on the temperature distribution is studied and discussed. Modeling results show that the relatively uniform current density is achieved at given conditions for the proposed design and the inclusion of thermal radiation is required for accurate prediction of temperature field in the single cell unit. (C) 2010 Elsevier B.V. All rights reserved.