Kinetics of structural relaxation of bulk and ribbon Pd40Cu30Ni10P20 glasses determined from electrical resistance measurements

The electrical resistances of ribbon and bulk Pd40Cu30Ni10P20 metallic glasses, whose quenching rates differ by four orders of magnitude, were precisely measured during cyclic heating. Three stages of electrical resistance relaxation are detected as the maximum heating temperature increases. The first and third stages decrease the electrical resistance, and the second stage increases it. The first stage is shown to be caused by the relaxation of deformation-induced internal stresses and not to be related to the excess free volume concentration, which differs by a factor of about 2 in the ribbon and bulk samples. The second stage reflects structural relaxation in the glass and is only partly related to its free volume. The third relaxation stage is assumed to be caused by fine precrystallization phenomena like phase separation. The effect of deformation by rolling or quenching from the temperature range of a supercooled melt on the resistance relaxation kinetics was also studied.