The flat end to cylindrical shell connection - limit load and creep design

被引：5

作者：

Preiss, R ^{[1
]}

Rauscher, F ^{[1
]}

Vazda, D ^{[1
]}

Zeman, JL ^{[1
]}

机构：

[1] Vienna Tech Univ, Inst Pressure Vessel & Plant Technol, A-1040 Vienna, Austria

来源：

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 1998年 / 75卷 / 10期

关键词：

D O I：

10.1016/S0308-0161(97)00104-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of the shear force, acting at the cylinder-plate intersection, on the limit load pressure is shown, and graphs for the determination of the Limit load pressure as well as the required plate thickness for a limit load design are given. The (ideal) plastic nonlinear viscoelastic analogue in generalized stresses for the determination of (highly nonlinear) creep results from given limit load results is described, and its usefulness and (technically satisfying) accuracy shown by means of two examples. (C) 1998 Published by Elsevier Science Ltd. All rights reserved.

引用

页码：715 / 726

页数：12

共 50 条

[1] Reference stress solutions of flat end to cylindrical shell connection and comparison with design stresses predicted by codes
Vilhelmsen, T
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2000, 77 (01) : 35 - 39
[2] Ratcheting limit of flat end cylindrical shell connections under internal pressure
Zeman, JL
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1996, 68 (03) : 293 - 298
[3] On concentration effects in flat end to cylindrical shell weld seams due to dissimilar creep properties
Vazda, D
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1997, 74 (02) : 145 - 152
[4] EDGE-LOAD RESPONSE OF A THIN CYLINDRICAL SHELL IN CREEP
CALLADIN.CR
[J]. BULLETIN DE L ACADEMIE POLONAISE DES SCIENCES-SERIE DES SCIENCES TECHNIQUES, 1964, 12 (11AS): : 33 - &
[5] LINE LOAD ON CYLINDRICAL-SHELL WITH END PLATES
WILLIAMS, JH
[J]. MECHANICAL ENGINEERING, 1974, 96 (08): : 67 - 67
[6] BUCKLING OF CANTILEVER CYLINDRICAL SHELL WITH A TRANSVERSE END LOAD
LU, SY
[J]. AIAA JOURNAL, 1965, 3 (12) : 2350 - &
[7] Stress concentration factors of flat end to cylindrical shell connection with a fillet or stress relief groove subjected to internal pressure
Preiss, R
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1997, 73 (03) : 183 - 190
[8] Stress concentration factors of flat end to cylindrical shell connection with a fillet or stress relief groove subjected to internal pressure
Vienna Univ of Technology, Vienna, Austria
[J]. Int J Pressure Vessels Piping, 3 (183-190):
[9] Analysis of limit load of damaged ring-stiffened cylindrical shell
Lu, Yansong
Xiao, Ken
[J]. ADVANCES IN CIVIL ENGINEERING II, PTS 1-4, 2013, 256-259 : 624 - 628
[10] Effect of Pad Reinforcement on the Plastic Limit Load for Nozzle Connection of Cylindrical Vessel
Skopinsky, V. N.
Berkov, N. A.
Vozhov, R. A.
[J]. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (02):

← 1 2 3 4 5 →