Heterostructured ?-Fe2O3/FeTiO3 magnetic nanocomposite: An efficient visible-light-driven photocatalyst for the degradation of organic dye

The catalyst recovery is the major concern in commercialization of photocatalysts for the industrial effluent treatment process. To overcome this major issue, Fe2O3 based magnetic photocatalytic heterostructure gamma-Fe2O3/ FeTiO3 nanocomposite was synthesized by hydrothermal method. Fe2O3 is the cheapest visible active magnetic photocatalytic material, but it has the limitation of fast e(-)/h + recombination. Titanium (Ti) was loaded on gamma-Fe2O3 to overcome this issue. The loaded Ti has grown as FeTiO3 on the surface of gamma-Fe2O3 nanocrystals and emerged as heterostructure gamma-Fe2O3/FeTiO3 nanocomposites, which was confirmed by XRD and TEM results. The loading concentration of Ti on gamma-Fe2O3 was optimized to achieve the maximum photocatalytic efficiency without compromising the magnetic property of gamma-Fe2O3 to facilitate the magnetic separation. DRS-UV spectra revealed the strong visible light response of gamma-Fe2O3/FeTiO3 nanocomposite. The photocatalytic efficiencies of the synthesized materials were evaluated using methylene blue (MB) as a model pollutant under sunlight. The built-in electric field between p-n junction between FeTiO3 and Fe2O3 and type II charge transfer mechanism extended the lifetime of the charge carriers at the heterojunction of gamma-Fe2O3/FeTiO3, which was confirmed by PL spectra. The vibrating sample magnetometer (VSM) study revealed the decreasing magnetization, coercivity (Hc), and retentivity (Mr) of gamma-Fe2O3 with increasing concentration of Ti. 92% of the used-up 20 wt% Ti loaded gamma-Fe2O3/FeTiO3 magnetic nanocomposite was recovered from the treated wastewater using an electromagnet. Both magnetic properties and efficiency of the nanocomposite increased up to 20 wt% of Ti loading, beyond that decreased due to the increasing composition of antiferromagnetic FeTiO3 and the increasing number of defect sites as recombination centers. Hence, 20 wt% loading of Ti was concluded as the optimum to enhance the efficiency and to retain the magnetic properties. This work aims the commercialization of magnetic photocatalytic materials for the industrial effluent treatment.