A Modified Johnson-Cook Model for Flow Behavior of Alloy 800H at Intermediate Strain Rates and High Temperatures

被引：22

作者：

Shokry, Abdallah ^{[1
]}

机构：

[1] Fayoum Univ, Mech Engn, Fac Engn, Al Fayyum 63514, Egypt

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2017年 / 26卷 / 12期

关键词：

alloy; 800H; high temperatures; intermediate strain rates; Johnson-Cook model; Kalman filter; CONSTITUTIVE MODEL; MICROSTRUCTURAL EVOLUTION; DYNAMIC-BEHAVIOR; HOT DEFORMATION; INCONEL; 718; PARAMETERS; IDENTIFICATION;

D O I：

10.1007/s11665-017-3076-x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A modified Johnson-Cook model for the flow behavior of alloy 800H at intermediate strain rates and high temperatures is presented. The modification is based on a study of the relation between strain hardening and both strain rate and softening parameters. The predicted stresses obtained using the modified model are compared to those obtained using the original Johnson-Cook model. The parameters constitute the two models are determined using the inverse method, Kalman filter. The results show that the modified model fits the experimental data very well for different combinations of strain rates and temperatures, with a mean value of R-squared regression of 0.90 for the modified model and 0.74 for the original Johnson-Cook model.

引用

页码：5723 / 5730

页数：8

共 50 条

[1] A Modified Johnson–Cook Model for Flow Behavior of Alloy 800H at Intermediate Strain Rates and High Temperatures
Abdallah Shokry
[J]. Journal of Materials Engineering and Performance, 2017, 26 : 5723 - 5730
[2] A Modified Johnson-Cook Constitutive Model for the Compressive Flow Behaviors of the SnSbCu Alloy at High Strain Rates
Xu, Hanzhang
Zhao, Bin
Lu, Xiqun
Liu, Zhigang
Li, Tongyang
Zhong, Ning
Yin, Xunshuai
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) : 6958 - 6968
[3] High strain rate behavior of alloy 800H at high temperatures
Shafiei, E.
[J]. JOURNAL OF NUCLEAR MATERIALS, 2016, 473 : 1 - 5
[4] A modified Johnson-Cook model for FeCoNiCr high entropy alloy over a wide range of strain rates
Bobbili, Ravindranadh
Madhu, Vemuri
[J]. MATERIALS LETTERS, 2018, 218 : 103 - 105
[5] A modified Johnson-Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates
Tan, Jin Qiang
Zhan, Mei
Liu, Shuai
Huang, Tao
Guo, Jing
Yang, He
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 631 : 214 - 219
[6] On the Prediction of the Flow Behavior of Metals and Alloys at a Wide Range of Temperatures and Strain Rates Using Johnson-Cook and Modified Johnson-Cook-Based Models: A Review
Shokry, Abdallah
Gowid, Samer
Mulki, Hasan
Kharmanda, Ghais
[J]. MATERIALS, 2023, 16 (04)
[7] Modified Johnson-Cook constitutive model of metallic materials under a wide range of temperatures and strain rates
Wang, Yuntian
Zeng, Xiangguo
Chen, Huayan
Yang, Xin
Wang, Fang
Zeng, Lingxi
[J]. RESULTS IN PHYSICS, 2021, 27
[8] A modified Johnson-Cook model for 10%Cr steel at elevated temperatures and a wide range of strain rates
He, Jianli
Chen, Fei
Wang, Bo
Zhu, Luo Bei
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 715 : 1 - 9
[9] Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models
Zhan, Hongyi
Wang, Gui
Kent, Damon
Dargusch, Matthew
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 612 : 71 - 79
[10] A modified Johnson-Cook model considering strain softening of A356 alloy
Niu, Liqun
Cao, Miao
Liang, Zhenglong
Han, Bin
Zhang, Qi
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 789

← 1 2 3 4 5 →