Finite element and experimental studies of the cutting process of SiCp/Al composites with PCD tools

被引：91
|
作者：
Zhou, Li [1 ]
Huang, S. T. [1 ]
Wang, D. [1 ]
Yu, X. L. [1 ]
机构：
[1] Shenyang Ligong Univ, Sch Mech Engn, Shenyang 110159, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2011年 / 52卷 / 5-8期
关键词：
SiCp/Al composite; PCD tool; Cutting force; von Mises stress; Finite element; METAL-MATRIX COMPOSITES; MACHINING PERFORMANCE; PART II; MACHINABILITY; SURFACE; WEAR; FORCES;
D O I：
10.1007/s00170-010-2776-2
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In this paper, a two-dimensional orthogonal cutting experiments and simulation analysis on the machining of SiCp/Al composites with a polycrystalline diamond tool have been carried out. By using two kinds of finite element models, the cutting force and von Mises equivalent stress at different cutting conditions were studied in detail. The results indicate that the cutting speed and depth have significant effects on the cutting force, and the predicted cutting force is in agreement with that of the experiment. The von Mises equivalent stress distributions of particle and matrix at three typical cases can explain the removal mechanism of SiC particle very well, which is also consistent with that of the experimental observation.
引用
收藏
页码：619 / 626
页数：8
相关论文
共 50 条
  • [1] Finite element and experimental studies of the cutting process of SiCp/Al composites with PCD tools
    Li Zhou
    S. T. Huang
    D. Wang
    X. L. Yu
    [J]. The International Journal of Advanced Manufacturing Technology, 2011, 52 : 619 - 626
  • [2] Experimental study of high-speed milling of SiCp/Al composites with PCD tools
    Huang, S. T.
    Zhou, L.
    Yu, X. L.
    Cui, Y.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (5-8): : 487 - 493
  • [3] Experimental study of high-speed milling of SiCp/Al composites with PCD tools
    S. T. Huang
    L. Zhou
    X. L. Yu
    Y. Cui
    [J]. The International Journal of Advanced Manufacturing Technology, 2012, 62 : 487 - 493
  • [4] Finite Element and Experimental Analysis of Edge Defects Formation during Orthogonal Cutting of SiCp/Al Composites
    Hou, Ning
    Zhou, Li
    Huang, Shutao
    Xu, Lifu
    [J]. ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 146 - 151
  • [5] Finite element analysis and experimental study on the cutting mechanism of SiCp/Al composites by ultrasonic vibration-assisted cutting
    Zhou, Yan
    Gu, Yan
    Lin, Jieqiong
    Zhao, Huibo
    Liu, Siyang
    Xu, Zisu
    Yu, Hang
    Fu, Xingbao
    [J]. CERAMICS INTERNATIONAL, 2022, 48 (23) : 35406 - 35421
  • [6] FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES
    Zhou Li
    Wang Changzhou
    Zhang Xingxing
    Xiao Bolu
    Ma Zongyi
    [J]. ACTA METALLURGICA SINICA, 2015, 51 (07) : 889 - 896
  • [7] A novel hybrid micro-texture for improving the wear resistance of PCD tools on cutting SiCp/Al composites
    Wu, Fenghe
    Zhang, Ning
    Peng, Wenxin
    Sun, Yingbing
    Li, Xiang
    Wang, Zhaohua
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2023, 101 : 930 - 942
  • [8] Finite element and experimental studies of the formation mechanism of edge defects during machining of SiCp/Al composites
    Zhou, L.
    Wang, Y.
    Ma, Z. Y.
    Yu, X. L.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 84 : 9 - 16
  • [9] Investigation on the cutting force of high-speed milling of high volume fraction of SiCp/Al composites with PCD tools
    Peng, Song
    Xie, Li-jing
    Wang, Xi-bin
    Fu, Na-xin
    Shi, Xing-kuan
    [J]. EIGHTH CHINA NATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND APPLICATIONS, 2014, 873 : 350 - +
  • [10] Drilling of SiCp/Al Metal Matrix Composites with Polycrystalline Diamond (PCD) Tools
    Huang, S. T.
    Zhou, L.
    Chen, J.
    Xu, L. F.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (10) : 1090 - 1094
12345