Oxidation behaviors of electrodeposited nickel-cobalt coatings in air at 960 °C

被引：14
|
作者：
Zhou Ke-chao [1 ]
Ma Li [1 ]
Li Zhi-you [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2011年 / 21卷 / 05期
基金：
中国国家自然科学基金;
关键词：
nickel-cobalt alloys; electrodeposition; high temperature oxidation; HIGH-TEMPERATURE OXIDATION; MAGNETIC-PROPERTIES; PURE NICKEL; THIN-FILMS; ALLOYS; NI; MICROSTRUCTURE; RESISTANCE; OXIDES; SCALE;
D O I：
10.1016/S1003-6326(11)60821-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Ni coating and Ni-Co alloy coatings were produced by adjusting the composition of the plating solution using a direct current electrodepositing process. The oxidation behaviors of nickel and nickel-cobalt alloys in air at 960 degrees C were studied by thermogravimetric (TG) analyzer and then the formed oxide scales were examined by scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), X-ray diffractometry (XRD), and Raman spectroscopy. The scale morphologies, composition, grain size and mechanism of oxidation were discussed in detail. The results show that oxidation rates of Ni, Ni-7%Co (mass fraction) and Ni-15%Co generally follow parabolic relationship, whereas that of Ni-30% Co alloy follows cubic relationship. The higher the Co content of the alloys is, the faster the oxidation rate is. Metal concentration profiles reveal cobalt depletion in the alloy surface beneath oxide scales, and a progressive enrichment in cobalt towards the outer surface of the scale.
引用
收藏
页码：1052 / 1060
页数：9
相关论文
共 50 条
  • [1] Corrosion resistance and microstructure of electrodeposited nickel-cobalt alloy coatings
    Srivastava, Meenu
    Selvi, V. Ezhil
    Grips, V. K. William
    Rajam, K. S.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06): : 3051 - 3060
  • [2] TENSILE PROPERTIES OF ELECTRODEPOSITED NICKEL-COBALT
    WALTER, RJ
    [J]. PLATING AND SURFACE FINISHING, 1986, 73 (10): : 48 - 53
  • [3] Characterization of electrodeposited nickel-cobalt selective black coatings: Scanning electron microscopic studies
    Karuppiah, N
    John, S
    Natarajan, S
    Sivan, V
    [J]. BULLETIN OF ELECTROCHEMISTRY, 2002, 18 (07): : 295 - 298
  • [4] Area and capacitance characterization of nickel, cobalt, and nickel-cobalt electrodeposited thin films
    Gira, Matthew J.
    Hampton, Jennifer R.
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2014, 247
  • [5] Characterization of electrodeposited nickel-cobalt based selective coatings for solar thermal energy conversion
    Karuppiah, N
    John, S
    [J]. BULLETIN OF ELECTROCHEMISTRY, 2000, 16 (02): : 71 - 74
  • [6] COMPOSITION CONTROL AND MICROSTRUCTURE OF ELECTRODEPOSITED NICKEL-COBALT ALLOYS
    WALTER, RJ
    [J]. PLATING AND SURFACE FINISHING, 1980, 67 (07): : 46 - 50
  • [7] OXIDATION OF MIXED NICKEL-COBALT SULFIDE
    TANABE, T
    MITARAI, T
    ASAKI, Z
    KONDO, Y
    [J]. TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1987, 28 (04): : 299 - 306
  • [8] Effect of cobalt content on the work function of the electrodeposited nickel-cobalt films
    Chung, C. K.
    Chang, W. T.
    Zhou, R. X.
    [J]. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2008, 14 (9-11): : 1389 - 1394
  • [9] OXIDATION OF MIXED NICKEL-COBALT SULFIDE
    TANABE, T
    MITARAI, T
    ASAKI, Z
    KONDO, Y
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1985, 49 (08) : 633 - 639
  • [10] IMPROVED MECHANICAL PROPERTY OF ELECTRODEPOSITED NANOCRYSTALLINE NICKEL-COBALT ALLOY
    Shen, Xixun
    Lian, Jianshe
    [J]. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (15-16): : 2285 - 2290
12345