Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 mu g/g for pirimicarb and 150 mu g/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.