Effect of the stabilisation time of pitch fibres on the molecular sieve properties of carbon fibres

被引:12
|
作者
Vilaplana-Ortego, E. [1 ]
Alcaniz-Monge, J. [1 ]
Cazorla-Amoros, D. [1 ]
Linares-Solano, A. [1 ]
机构
[1] Univ Alicante, Dept Inorgan Chem, E-03080 Alicante, Spain
关键词
pitch; stabilisation; fibres; carbon molecular sieve;
D O I
10.1016/j.micromeso.2007.04.025
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
The stabilisation of pitch fibres (PFs) is the most important step for their subsequent use in the preparation of carbon fibres (CFs) and their resulting characteristics. The present work studies the influence that the stabilisation time has on the porosity of the CFs, and on the subsequent properties as carbon molecular sieve (CMS). The increase of the stabilisation time carried out at 573 K, from 2 to 8 h favours their CMS properties producing a decrease in the microposity accessible to N-2, which gets completely blocked after 6 and 8 h, while the narrow microporosity (V-DR CO2) remains accessible. Adsorption kinetic studies with CH4 and CO2 were performed to assess the possibility of using these ClFs as CMS by comparing them with Takeda 3A CMS. The results suggest that there is an optimal stabilisation time which allows the preparation of CFs from an abundant raw precursor with properties similar to Takeda 3A CMS. (C) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:21 / 27
页数:7
相关论文
共 50 条
  • [1] Molecular sieve properties of general-purpose carbon fibres
    de la Casa-Lillo, MA
    Alcaniz-Monge, J
    Raymundo-Pinero, E
    Cazorla-Amoros, D
    Linares-Solano, A
    [J]. CARBON, 1998, 36 (09) : 1353 - 1360
  • [2] Microwave heating as a novel method for introducing molecular sieve properties into activated carbon fibres
    Carrott, PJM
    Nabais, JMV
    Carrott, MMLR
    Menéndez, JA
    [J]. CARBON, 2004, 42 (01) : 227 - 229
  • [3] PREPARATION OF CARBON FIBRES FROM PITCH
    BRIE, M
    LANG, FM
    [J]. BULLETIN D INFORMATIONS SCIENTIFIQUES ET TECHNIQUES, 1971, (155): : 17 - &
  • [4] Stabilisation of low softening point petroleum pitch fibres by iodine treatment
    Vilaplana-Ortego, E.
    Alcaniz-Monge, J.
    Cazorla-Amoros, D.
    Linares-Solano, A.
    [J]. FUEL PROCESSING TECHNOLOGY, 2007, 88 (03) : 265 - 272
  • [5] Effect of sizing on the surface properties of carbon fibres
    Montes-Morán, MA
    Martínez-Alonso, A
    Tascón, JMD
    [J]. JOURNAL OF MATERIALS CHEMISTRY, 2002, 12 (12) : 3843 - 3850
  • [6] Extrusion Dwell Time and Its Effect on the Mechanical and Thermal Properties of Pitch/LLDPE Blend Fibres
    Aldosari, Salem Mohammed
    Rahatekar, Sameer
    [J]. CRYSTALS, 2021, 11 (12)
  • [7] Stabilisation of low softening point petroleum pitch fibres by HNO3
    Vilaplana-Ortego, E
    Alcañiz-Monge, J
    Cazorla-Amorós, D
    Linares-Solano, A
    [J]. CARBON, 2003, 41 (05) : 1001 - 1007
  • [8] Study of the bromination of pitch-based carbon fibres
    Klimenko, IV
    Zhuravleva, TS
    Geskin, VM
    Jawhary, T
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 1998, 56 (01) : 14 - 20
  • [9] Properties of Metallized Carbon Fibres
    O. M. Sladkov
    S. E. Artemenko
    [J]. Fibre Chemistry, 2003, 35 : 368 - 370
  • [10] Large diameter carbon fibres from mesophase pitch
    Lu, SL
    Blanco, C
    Rand, B
    [J]. CARBON, 2002, 40 (12) : 2109 - 2116