Calculation Model for Estimation of Residual Bearing Capacity of Damaged Reinforced Concrete Slender Columns

被引:3
|
作者
Kos, Zeljko [1 ]
Klymenko, Yevhenii [2 ]
Crnoja, Andelko [1 ]
Grynyova, Iryna [3 ]
机构
[1] Univ North, Dept Civil Engn, Varazhdin 42000, Croatia
[2] Odessa State Acad Civil Engn & Architecture, Dept Reinforced Concrete Struct & Transport Struc, Didrichson St 4, UA-65029 Odessa, Ukraine
[3] Odessa State Acad Civil Engn & Architecture, Dept Architecture Struct, UA-65029 Odessa, Ukraine
来源
APPLIED SCIENCES-BASEL | 2022年 / 12卷 / 15期
关键词
reinforced concrete columns; rectangular section; flexibility; residual bearing capacity; damage during operation;
D O I
10.3390/app12157430
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
This work is devoted to the study of the influences of various parameters on the bearing capacities of compressed reinforced concrete columns of varying flexibilities damaged during operation. Experimental tests of pilot samples were carried out, and results were analyzed on the basis of which it was established that significant longitudinal bending was observed in the direction of the x-axis. By analyzing the influences of the angle and depth of damage on the behavior and nature of the destruction in the experimental samples, three main destruction patterns were identified. An analysis of the experimental and statistical models showed that the greatest influences on the bearing capacity of the samples were the depth of the damage and the angle of the cut, and the effect of the height of the samples was virtually negligible. A model of calculation for the residual bearing capacities of compressed damaged reinforced concrete elements of different flexibilities was developed. The results of the comparison testify to the good coincidence of the theoretical values with the values obtained from the actual experiment (the difference of an average of no more than 29.8%), indicating that the proposed method can be applied in building practice.
引用
收藏
页数:15
相关论文
共 50 条
  • [1] Numerical model for the residual seismic capacity of seismically damaged reinforced concrete columns
    Li L.
    Luo G.-X.
    Wang Z.-H.
    Zheng S.-S.
    Gongcheng Lixue/Engineering Mechanics, 2020, 37 (12): : 52 - 67
  • [2] BEARING CAPACITY OF SLENDER CONCRETE COLUMNS
    Strauss, Alfred
    Zimmermann, Thomas
    Spyridis, Panagiotis
    Taeubling, Benjamin
    SLOVAK JOURNAL OF CIVIL ENGINEERING, 2018, 26 (04) : 39 - 49
  • [3] Residual bearing capacity of the frost-damaged reinforced concrete beams
    Hassanzadeh, Manouchehr
    NORDIC CONCRETE RESEARCH, 2015, 53 (02): : 69 - 72
  • [4] Coefficient of curvature influence in calculation of bearing capacity of reinforced concrete columns
    Chen, B. (baochunchen@fzu.edu.cn), 1600, Science Press (35):
  • [5] The Development of Prediction Model for Failure Force of Damaged Reinforced-Concrete Slender Columns
    Gotal Dmitrovic, Lovorka
    Kos, Zeljko
    Klimenko, Yvgenii
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2019, 26 (06): : 1635 - 1641
  • [6] Computational model for bearing capacity of corroded reinforced concrete columns
    Chen, Xiao-Chen
    Liu, Xi-La
    Song, Xiao-Bing
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2008, 42 (06): : 985 - 988
  • [7] Residual strength of blast damaged reinforced concrete columns
    Bao, Xiaoli
    Li, Bing
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2010, 37 (03) : 295 - 308
  • [8] Research of the Residual Bearing Capacity and the Work of Damaged Reinforced Concrete Beams' Inclined Sections
    Kos, Zeljko
    Klymenko, Yevhenii
    Polianskyi, Kostiantyn
    Crnoja, Andjelko
    TEHNICKI GLASNIK-TECHNICAL JOURNAL, 2020, 14 (04): : 466 - 472
  • [9] Calculation of the residual bearing capacity of reinforced concrete beams by the rigidity (deflection) criterion
    Utkin, V. S.
    Solovyov, S. A.
    MAGAZINE OF CIVIL ENGINEERING, 2015, 56 (04): : 56 - 66
  • [10] Experimental study on residual compressive bearing capacity of cracked reinforced concrete columns by SCDA
    Sun, Jinshan
    Liu, Shaoyan
    Hu, Lingling
    Jia, Yongsheng
    Yao, Yingkang
    Xia, Yuqing
    MATERIALS RESEARCH EXPRESS, 2024, 11 (10)