Sulfurization temperature effects on the growth of Cu2ZnSnS4 thin film

We made Cu2ZnSnS4 (CZTS) thin films by sulfurization of Cu/Sn/Cu/Zn metallic films. Sulfurizations were carried out under different thermal annealing conditions, where maximum temperatures were 440 degrees C (LT-CZTS) and 550 degrees C (HT-CZTS). For LT-CZTS films, secondary phases such as SnS2 and Cu2-xS were observed, whereas for HT-CZTS films secondary impurities were not detected. Chemical composition of LT-CZTS film was observed to be very non-uniform. Highly Sn-rich and Zn-rich regions were found on the film surface of LT-CZTS. However, averaged chemical composition for larger area was close to stoichiometry. The HT-CZTS film showed homogeneous structural and chemical composition features. But, for HT-CZTS film, the Sn composition was observed to be decreased, which was due to the Sn-loss. By UV-Visible spectroscopy, optical band gaps of LT-and HT-CZTS films were measured to be similar to 1.33 eV and similar to 1.42 eV, respectively. The band gap of LT-CZTS film was also observed to be smaller by photo-luminescence measurement. The depressed band gap of LT-CZTS film may be ascribed to some defects and low band gap impurities such as Cu2SnS3 and Cu2-xS in the LT-CZTS film. Crown Copyright (C) 2012 Published by Elsevier B. V. All rights reserved.