Evaluation of Soil-Water Characteristic Curve and Pore-Size Distribution of Fine-Grained Soils

A soil's physical properties, mineral types, and pore structure significantly influence the shape and properties of the soil-water characteristic curve (SWCC). This study investigated the effects of the soil's physical properties and mineral types on the SWCC and pore-size distribution (PSD). Eight different soils from an alluvial deposit in Istanbul and Adapazari/Turkiye were used in the study. The test samples were prepared by compaction at optimum water content (OWC) and wet side of optimum water content (wet of OWC). The samples were prepared by consolidation from the slurry. The PSDs of the samples were calculated using the SWCCs and evaluated with scanning electron microscope (SEM) analysis. In addition, the mineral types of all soils were determined by X-ray diffraction analysis. The soil which contains illite-type minerals has higher matric suction than containing kaolin-type. The effect of the clay percentage is more pronounced in silty soils than in plasticity and activity. Soil suction increased with decreasing compaction water content in clayey soils. The air entry water contents rose as the void ratio, liquid limit, clay content, and plasticity increased. The compaction conditions affected the macropore structure more than the micropore structure. In addition, the ratio of macro-micro pore sizes increased with the rise of the compaction water content.