3D PRINTING OF SUPER CONCENTRATED ALGINATE CLAY INK WITH POTENTIAL APPLICATION IN REGENERATIVE MEDICINE

被引：0
|
作者：
Leu Alexa, Rebeca [1 ]
Iovu, Horia [1 ,2 ]
Nicolae, Madalina Cristina [1 ]
Mihaescu, Ionut Catalin [3 ]
Alexandrescu, Elvira [3 ]
Ianchis, Raluca [3 ]
机构：
[1] Univ Politehn Bucuresti, Dept Bioresources & Polymer Sci, Adv Polymer Mat Grp, Bucharest, Romania
[2] Acad Romanian Scientists, Bucharest, Romania
[3] Natl RD Inst Chem & Petrochem ICECHIM Bucharest, Bucharest, Romania
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2021年 / 83卷 / 04期
关键词：
alginate; natural clay; 3D printing;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The central objective of this study was to obtain a 3D printable ink with possible application in regenerative medicine. On this line, we developed printable inks based on alginate in a concentration of 5% and ClositeNa (ClNa) in two concentration (18% and 20%.) All the ink formulations were characterized from the point of view of printability, then a roundness analyze was performed to quantify the printing fidelity. It could be observed that with the increase of the clay concentration, the structural integrity of the scaffolds was enhanced. Also, all the materials were charaterized using FTIR, SEM, TGA and Nanoindentation analysis.
引用
收藏
页码：197 / 208
页数：12
相关论文
共 50 条
  • [1] 3d printing of super concentrated alginate clay ink with potential application in regenerative medicine
    Leu Alexa, Rebeca
    Iovu, Horia
    Nicolae, Madalina Cristina
    Mihaescu, Ionut Catalin
    Alexandrescu, Elvira
    Ianchis, Raluca
    [J]. UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 2021, 83 (04): : 197 - 208
  • [2] Clay Minerals as Bioink Ingredients for 3D Printing and 3D Bioprinting: Application in Tissue Engineering and Regenerative Medicine
    Garcia-Villen, Fatima
    Ruiz-Alonso, Sandra
    Lafuente-Merchan, Markel
    Gallego, Idoia
    Sainz-Ramos, Myriam
    Saenz-del-Burgo, Laura
    Pedraz, Jose Luis
    [J]. PHARMACEUTICS, 2021, 13 (11)
  • [3] 3D printing and bioprinting for regenerative medicine applications
    Placone, Jesse
    Fisher, John
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2016, 252
  • [4] 3D printing for regenerative medicine: From bench to bedside
    Juan Li
    Ling He
    Chen Zhou
    Yue Zhou
    Yanying Bai
    Francis Y. Lee
    Jeremy J. Mao
    [J]. MRS Bulletin, 2015, 40 : 145 - 153
  • [5] 3D Printing in Regenerative Medicine: Technologies and Resources Utilized
    Kantaros, Antreas
    [J]. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2022, 23 (23)
  • [6] 3D printing for regenerative medicine: From bench to bedside
    Li, Juan
    He, Ling
    Zhou, Chen
    Zhou, Yue
    Bai, Yanying
    Lee, Francis Y.
    Mao, Jeremy J.
    [J]. MRS BULLETIN, 2015, 40 (02) : 145 - 153
  • [7] Highly concentrated graphene oxide ink for facile 3D printing of supercapacitors
    Ling, Shangwen
    Kang, Wenbin
    Tao, Shanwen
    Zhang, Chuhong
    [J]. NANO MATERIALS SCIENCE, 2019, 1 (02) : 142 - 148
  • [8] Highly concentrated graphene oxide ink for facile 3D printing of supercapacitors
    Shangwen Ling
    Wenbin Kang
    Shanwen Tao
    Chuhong Zhang
    [J]. Nano Materials Science, 2019, 1 (02) : 142 - 148
  • [9] Highly concentrated graphene oxide ink for facile 3D printing of supercapacitors
    Shangwen Ling
    Wenbin Kang
    Shanwen Tao
    Chuhong Zhang
    [J]. Nano Materials Science, 2019, (02) : 142 - 148
  • [10] 3D Printed Alginate Hydrogel Scaffolds in Regenerative Medicine Techniques
    Hendricks, T.
    Cook, A.
    Baba, T.
    Dodge, C.
    Dangerfield, J.
    Rosqvist, S.
    Larsen, K.
    [J]. TISSUE ENGINEERING PART A, 2015, 21 : S248 - S248
12345