A new kind of age hardenable martensitic stainless steel with high strength and toughness

被引：10
|
作者：
Akhtar, F. [1 ]
Lian, Y. D. [1 ]
Islam, S. H. [1 ]
Guo, S. J. [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
IRONMAKING & STEELMAKING | 2007年 / 34卷 / 04期
关键词：
martensitic stainless steel; alloy element; precipitation; corossion resistant; heat treatment;
D O I：
10.1179/174328107X155303
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Following analysis of typical age hardenable martensitic stainless steels, a new kind of maraging stainless was developed. The new maraging stainless steel showed high strength, ultimate tensile strength (UTS)= 1670 MPa, high toughness, K-IC=83.9 MPa ml(1/2) and hardness as high as 478 HV in the age hardened condition. Microstructural study with an optical and transmission electron microscope revealed the typical microstructure of age hardenable stainless steel containing lath martensite and precipitates. Ti,Ni precipitates were identified by transmission electron microscopy, which were responsible for the increase in mechanical properties after age hardening. The results of natural salt spray test showed that the corrosion resistance of new maraging stainless steel approached to the corrosion resistance of 304L stainless steel.
引用
收藏
页码：285 / 289
页数：5
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of a new kind of precipitation-hardenable martensitic stainless steel with ultra-high strength and high toughness
    Li, Zhi
    Zhi, Min-Xue
    Liu, Tian-Qi
    Zhao, Zhen-Ye
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2000, 20 (03): : 4 - 5
  • [2] Effect of silicon content on the strength and toughness of a martensitic stainless steel
    Hitit, A
    43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 2001, 39 : 611 - 616
  • [3] Martensitic Age-Hardenable Stainless Steel: Versatility for Wide Array of Applications
    Midha, Arvind
    Wert, David E.
    ADVANCED MATERIALS & PROCESSES, 2011, 169 (09): : 30 - 33
  • [4] WELDABILITY OF A HIGH STRENGTH MARTENSITIC STAINLESS STEEL
    KAAE, JL
    BRITISH WELDING JOURNAL, 1968, 15 (07): : 333 - &
  • [5] FATIGUE STRENGTH OF A WELDABLE HIGH STRENGTH MARTENSITIC STAINLESS STEEL
    KALTENHA.RH
    LOVEJOY, PT
    WELDING JOURNAL, 1967, 46 (09) : S391 - &
  • [6] Dynamic and metadynamic recrystallization of a martensitic precipitation hardenable stainless steel
    Momeni, A.
    Abbasi, S. M.
    Shokuhfar, A.
    CANADIAN METALLURGICAL QUARTERLY, 2007, 46 (02) : 189 - 193
  • [7] Origin of low temperature toughness in a 12Cr-10Ni martensitic precipitation hardenable stainless steel
    Anoop, C. R.
    Prakash, Aditya
    Murty, S. V. S. Narayana
    Samajdar, Indradev
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 709 : 1 - 8
  • [8] Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel
    Luo, Haiwen
    Wang, Xiaohui
    Liu, Zhenbao
    Yang, Zhiyong
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 51 : 130 - 136
  • [9] Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel
    Haiwen Luo
    Xiaohui Wang
    Zhenbao Liu
    Zhiyong Yang
    Journal of Materials Science & Technology, 2020, 51 (16) : 130 - 136
  • [10] A Novel Cast Multiphase Stainless Steel With High Strength and High Toughness
    Wu, Zixiang
    Wang, Mengxin
    He, Jingyu
    Liu, Yuan
    Zhang, Huawei
    Chen, Xiang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (07): : 2617 - 2630
12345