COARSENING KINETICS OF Fe3C PARTICLES IN Fe-0.67 %C STEEL

被引：0
|
作者：
Matusiewicz, P. [1 ]
Wiencek, K. [1 ]
机构：
[1] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, PL-30059 Krakow, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2010年 / 55卷 / 01期
关键词：
disperse phase; Ostwald ripening; particle coarsening;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Kinetics of Fe(3)C particle coarsening in Fe-0.67%C steel for of two materials (A, B) of different microstructures (with different matrix (ferrite) grain size and particles distribution) was investigated. In material A, obtained by quench-hardening with subsequent tempering, the particles are mainly at grain (subgrain) boundaries of fine-grained matrix formed by in situ recrystallization of ferrite. In material B, obtained by recrystallization after cold rolling (10%), particles are mainly inside grains of coarse-grained matrix formed by discontinuous recrystallization of ferrite. During annealing (at 680, 700 i 715 degrees C up to 800 hours) the microstructure morphology of A and B is preserved; the material microstructure determines the particle coarsening rate, it is lower in B. Analysis of empirical kinetic functions with the LSW theory suggest that higher particle coarsening rate in A results from higher diffusivity of Fe along the matrix grain boundaries. Lower particle coarsening rate in B results from matrix diffusion of C and Fe.
引用
收藏
页码：231 / 238
页数：8
相关论文
共 50 条
  • [1] SPATIAL DISTRIBUTION OF CEMENTITE PARTICLES IN Fe-0.67% C STEEL
    Matusiewicz, P.
    Czarski, A.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (02) : 631 - 634
  • [2] RECRYSTALLIZATION OF FERRITE IN SPHEROIDITE OF Fe-0.67%C STEEL
    Matusiewicz, P.
    Ratuszek, W.
    Zielinska-Lipiec, A.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2011, 56 (01) : 63 - 69
  • [3] A transition of ω-Fe3C → ω′-Fe3C → θ′-Fe3C in Fe-C martensite
    D. H. Ping
    H. P. Xiang
    H. Chen
    L. L. Guo
    K. Gao
    X. Lu
    [J]. Scientific Reports, 10
  • [4] A transition of ω-Fe3C→ω′-Fe3C→θ′-Fe3C in Fe-C martensite
    Ping, D. H.
    Xiang, H. P.
    Chen, H.
    Guo, L. L.
    Gao, K.
    Lu, X.
    [J]. SCIENTIFIC REPORTS, 2020, 10 (01)
  • [5] Formation of θ-Fe3C Cementite via θ′-Fe3C (ω-Fe3C) in Fe-C Alloys
    Ping, De-hai
    Chen, Hao
    Xiang, Hongping
    [J]. CRYSTAL GROWTH & DESIGN, 2021, 21 (03) : 1683 - 1688
  • [6] DISSOLUTION KINETICS OF FE3C IN FERRITE
    NOLFI, FV
    FOSTER, JS
    [J]. JOURNAL OF METALS, 1968, 20 (08): : A120 - &
  • [7] DISSOLUTION KINETICS OF FE3C IN FERRITE
    NOLFI, FV
    SHEWMON, PG
    FOSTER, JS
    [J]. METALLURGICAL TRANSACTIONS, 1970, 1 (04): : 789 - &
  • [8] KINETICS OF FORMATION OF CEMENTILE (FE3C)
    CHEUNG, CT
    SIMKOVICH, G
    [J]. JOURNAL OF METALS, 1984, 36 (07): : 37 - 37
  • [9] Metastable ω′-Fe3C carbide formed during.-Fe3C particle coarsening in binary Fe-C alloys
    Ping, D. H.
    Xiang, H. P.
    Liu, X.
    Ji, X.
    Li, S. J.
    Lu, X.
    [J]. JOURNAL OF APPLIED PHYSICS, 2019, 125 (17)
  • [10] Spatial distribution of Fe3C-particles in steel during coarsening
    Wiencek, K
    [J]. STEEL RESEARCH, 1996, 67 (10): : 419 - 422
12345