Thermal residual stresses in silicon thin film solar cells under operational cyclic thermal loading: A finite element analysis

被引:17
|
作者
Namvar, A. [1 ]
Dehghany, M. [1 ]
Sohrabpour, S. [1 ]
Naghdabadi, R. [1 ,2 ]
机构
[1] Sharif Univ Technol, Dept Mech Engn, Tehran 111559567, Iran
[2] Sharif Univ Technol, Inst Nanosci & Technol, Tehran 111559567, Iran
关键词
Amorphous silicon; Thin film solar cell; Thermal residual stress; Finite element analysis; Cyclic thermal stresses; AMORPHOUS-SILICON; SI; TEMPERATURE; PERFORMANCE; TRANSISTORS; SIMULATION; SUBSTRATE;
D O I
10.1016/j.solener.2016.05.058
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In manufacturing amorphous silicon solar cells, thin films are deposited at high temperatures (200400 degrees C) on a thick substrate using sputtering and plasma enhanced chemical vapor deposition (PECVD) methods. Since the thin films and substrate have different thermal expansion coefficients, cooling the system from deposition temperature to room temperature induces thermal residual stresses in both the films and substrate. In addition, these stresses, especially those having been induced in the amorphous silicon layer can change the carrier mobility and band gap energy of the silicon and consequently affect the solar cell efficiency. In this paper, a 2D finite element model is proposed to calculate these thermal residual stresses. The model is verified by the available analytical results in the literature. Then using the model, the thermal residual stresses are studied in a commercial amorphous silicon thin film solar cell for different deposition temperatures, and subsequently, the simulation results are validated with experimental results. It is shown that for the deposition temperatures of 200 and 300 degrees C, the biaxial thermal stress reaches the values of -367 and -578 MPa, respectively, in the amorphous silicon layer. Finally, the model is utilized to study the cyclic thermal stresses arising in the solar cell installed in Tehran as a sample city during its operational time due to the ambient temperature changes and photovoltaic process. The results are reported for different months based on the minimum and maximum temperatures published during a year. It is demonstrated that the temperature changes can induce mean stress with stress amplitude of -526 and 60 MPa, respectively, in the amorphous silicon layer during June, for example. The calculated loading history can be used by the manufactures in thermal fatigue life assessment of the solar cell. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:366 / 373
页数:8
相关论文
共 50 条
  • [1] Finite element analysis of thermal residual stresses in castellated beams
    Zhou, Xuhong
    Li, Jingchao
    He, Yongjun
    He, Ziqi
    Li, Zhanjie
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 148 : 741 - 755
  • [2] Finite element simulation of thermal residual stresses in joining ceramics with thin metal interlayers
    Kovalev, SP
    Miranzo, P
    Osendi, MI
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (09) : 2342 - 2348
  • [3] Finite element modeling of thermal residual and contact stresses of thin films on aluminum substrates
    Souza, RM
    Mustoe, GGW
    Moore, JJ
    [J]. SURFACE ENGINEERING: SCIENCE AND TECHNOLOGY I, 1999, : 487 - 496
  • [4] Thermal stresses and cracking behavior during laser crystallization of silicon on glass for thin film solar cells
    Pliewischkies, Torsten
    Schmidt, Thomas
    Hoeger, Ingmar
    Bergmann, Joachim
    Gawlik, Annett
    Andrae, Gudrun
    Falk, Fritz
    [J]. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2015, 212 (02): : 317 - 322
  • [5] Analysis of Residual and Operational Thermal Stresses in a Planar SOFC
    Severson, Henning
    Assadi, Mohsen
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2013, 10 (06):
  • [6] USING COMPUTATIONAL FLUID DYNAMICS AND FINITE ELEMENT ANALYSIS TO DETERMINE BOLT STRESSES DUE TO THERMAL CYCLIC LOADING
    Martinez, Phil
    McGuffie, Sean M.
    Porter, Michael A.
    [J]. PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 3, 2010, : 175 - 180
  • [7] Finite element analysis of free-edge stresses in composite laminates under mechanical an thermal loading
    Nguyen, Viet-Tung
    Caron, Jean-Francois
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (01) : 38 - 49
  • [8] Finite element analysis of the residual thermal stresses on functionally gradated dental restorations
    Henriques, B.
    Miranda, G.
    Gasik, M.
    Souza, J. C. M.
    Nascimento, R. M.
    Silva, F. S.
    [J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2015, 50 : 123 - 130
  • [9] Finite Element Analysis of the Thermal Residual Stresses of Diamond Cutting Tools in the Sintering Process
    Reis, L.
    Amaral, P.
    Li, B.
    Anjinho, C.
    Rosa, L. G.
    Freitas, M.
    [J]. ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 695 - +
  • [10] Finite element analysis of the effectiveness of interlayers in reducing thermal residual stresses in diamond films
    Wright, J.K.
    Williamson, R.L.
    Maggs, K.J.
    [J]. Materials Science and Engineering A, 1994, A187 (01) : 87 - 96