SIMMF-S1 TESTING MACHINE CALIBRATION IN COMPRESSION SIM COMPARISON UP TO 100 kN

被引：0
|
作者：
Villarroel Poblete, Juan Christian [1 ]
Oliva C, Hernan [1 ]
Soto Pinto, Luis Ruben [1 ]
Haucke, Guenther [2 ]
机构：
[1] Inst Invest & Control Ejercito IDIC, Santiago, Chile
[2] Phys Tech Bundesanstalt, Braunschweig, Germany
来源：
METROLOGIA | 2014年 / 51卷
关键词：
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
A SIM comparison was performed in the field of testing machines calibration. This comparison is registered in the BIPM key comparison database (KCDB) as supplementary comparison SIM.M.F-S1. It was conducted among 13 participants and IDIC (Chile) was the Pilot laboratory for this exercise. The final report lists all data of measurement results and declared uncertainties as obtained by the participating NMIs, as well as degrees of equivalence and levels of measurement agreement.
引用
收藏
页数：6
相关论文
共 10 条
  • [1] Testing machine calibration in compression SIM comparison UP TO 100 kN
    Poblete, Juan Christian Villarroel
    Oliva, Hernán C.
    Pinto, Luis Rubén Soto
    Haucke, Guenther
    Metrologia, 2014, 51 (1A)
  • [2] FINAL REPORT OF THE FORCE SUPPLEMENTARY COMPARISON AT SIM (SIMMF-S5), COMPRESSION TESTING MACHINES CALIBRATION, UP TO 200 kN
    Cardenas Moctezuma, A.
    Torres Guzman, J. C.
    Dajer Espeleta, A.
    De La Cruz Garcia, L.
    Tioli Mora, H.
    Granados, L.
    METROLOGIA, 2016, 53
  • [3] Force national standards comparison in the interamerican system of metrology (SIM), 100 kN compression
    Villarroel Poblete, Juan Christian
    David Betancur, Ivan
    Dajer Espeleta, Stides
    Savarin, Alejandro
    METROLOGIA, 2020, 57 (1A)
  • [4] Final report on SIM.T-S5: comparison of the calibration of 100 Ω platinum resistance thermometers
    del Campo, D.
    Garcia, S.
    Velasquez, A.
    Medrano, J. A.
    Solano, A.
    Torres, H. E.
    METROLOGIA, 2015, 52
  • [5] Final Report SIM.T-S2 Report on the comparison of the calibration of 100 Ω Platinum Resistance Thermometers
    del Campo, D.
    Chimenti Ruiz, V.
    Mendez-Lango, E.
    Cordova, L.
    von Borries, E.
    Sanchez, C. A.
    Arevalo, A.
    Aguilera, B.
    Guillen, E.
    Cabrera, C.
    Quintana, L.
    METROLOGIA, 2013, 50
  • [6] Report on the AFRIMETS.M. F-S1 supplementary force comparison for 10 kN and 100 kN
    Bangi J.O.
    Seidel M.
    Kimetto D.
    Kumme R.
    Rotich H.
    Roske D.
    Metrologia, 2022, 59 (1 A)
  • [7] Bilateral comparison in torque transducer calibration between CENAM, Mexico and CEM, Spain, SIM.M.T-S1
    Torres-Guzman J.C.
    Martin M.N.M.
    Izquierdo M.C.G.
    Mancilla J.J.G.
    Verdecia J.L.R.
    Metrologia, 2022, 59 (1 A)
  • [8] In-situ SEM micropillar compression and nanoindentation testing of SU-8 polymer up to 1000 s-1 strain rate
    Cherukuri, Rahul
    Lambai, Aloshious
    Sukki, Lassi
    Valiaho, Jari
    Kallio, Pasi
    Sarlin, Essi
    Ramachandramoorthy, Rajaprakash
    Kanerva, Mikko
    Mohanty, Gaurav
    MATERIALS LETTERS, 2024, 358
  • [9] Bilateral comparison EURAMETMP-S10 Final report Calibration of a SRG between 0.005 Pa and 1 Pa, and of a CDG between 0.5 Pa and 100 Pa 2010-2011
    Medina, Nieves
    METROLOGIA, 2011, 48
  • [10] Final report on the torque supplementary comparison COOMETMT-S1 measurand torque: 0 N.m, 100 N.m, 500 kN.m, 1500 N.m, 2500 N.m
    Cherepanov, Boris
    Roeske, Dirk
    METROLOGIA, 2017, 54
1