Experimental study on flow condensation of mixture in a hydrophobic microchannel

The condensation flow patterns of ethanol-water mixture in a wide range of ethanol mass concentration inside a hydrophobic microchannel is experimentally studied via a high speed imaging system. The effects of channel surface wettability and ethanol concentration on flow condensation are compared and discussed. The experimental results indicate that the surface hydrophobic modification and ethanol concentration play a significant role in the flow condensation of mixture in a microchannel. The droplet condensation appears almost the whole two-phase flow region when the water steam is the main component, in which the droplet flow, droplet-streak flow, droplet-annular flow, droplet-injection flow and droplet-slug/bubble flow occur sequentially in a hydrophobic microchannel. With increasing ethanol concentration, the droplet-slug/bubble flow after droplet-injection flow disappears and is replaced by the pure slug/bubble flow. When the ethanol vapor is the main component, the droplet condensation almost disappears, and the annular-streak flow, annular flow, injection flow and slug/bubble flow appear sequentially along the flow direction. Both an increase in vapor Reynolds number and a decrease in ethanol concentration cause the injection location move toward the channel outlet. In addition, the surface hydrophobic modification introduces the droplet condensation, which is beneficial for the flow condensation heat transfer. (C) 2016 Elsevier Ltd. All rights reserved.