Studies on Cutting Forces of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling

被引：2
|
作者：
Xiang, Daohui [1 ]
Yue, Guangxi [1 ]
Zhi, Xintao [1 ]
Liu, Haitao [1 ]
Zhao, Bo [1 ]
机构：
[1] Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo, Peoples R China
来源：
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3 | 2011年 / 295-297卷
关键词：
Orthogonal Method; SiCp/Al MMCs; Ultrasonic High Speed Milling; Cutting Forces; MATRIX COMPOSITES;
D O I：
10.4028/www.scientific.net/AMR.295-297.785
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The orthogonal method was used for analyzing the machining performance of high volume fraction SiCp/Al metal matrix composites (SiCp/Al MMCs) during high speed milling and ultrasonic high speed milling in this paper. The influence of cutting speed, feed rate and cutting depth on 3-directional forces were investigated. The results show that the cutting forces are decreased due to the cutting mechanism of SiCp/Al MMCs is changed from brittle cutting to ductile cutting during ultrasonic high speed milling. In addition, the chips exist in forms of C-type chips because of increasing rake angles. Ultrasonic high-speed milling is a more highly effective hard cutting way compared with high speed milling.
引用
收藏
页码：785 / 788
页数：4
相关论文
共 50 条
  • [1] Study on Tool Wear of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling
    Xiang, Daohui
    Liu, Haitao
    Jiang, Xiao
    Liang, Song
    Yang, Guangbin
    ADVANCED RESEARCH ON APPLIED MECHANICS AND MANUFACTURING SYSTEM, 2013, 252 : 198 - 201
  • [2] Cutting Forces when High-speed Milling of SiCp/Al Composites
    Ge, Yingfei
    Xu, Jiuhua
    Fu, Yucan
    ADVANCED DESIGN TECHNOLOGY, PTS 1-3, 2011, 308-310 : 871 - +
  • [3] Investigation on the cutting force of high-speed milling of high volume fraction of SiCp/Al composites with PCD tools
    Peng, Song
    Xie, Li-jing
    Wang, Xi-bin
    Fu, Na-xin
    Shi, Xing-kuan
    EIGHTH CHINA NATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND APPLICATIONS, 2014, 873 : 350 - +
  • [4] Finite Element and Experimental Analysis of Ultrasonic Vibration Milling of High-Volume Fraction SiCp/Al Composites
    Zhan-Li Shi
    Dao-Hui Xiang
    Hao-Ren Feng
    Bang-Fu Wu
    Zhi-Meng Zhang
    Guo-Fu Gao
    Bo Zhao
    International Journal of Precision Engineering and Manufacturing, 2021, 22 : 1777 - 1789
  • [5] Finite Element and Experimental Analysis of Ultrasonic Vibration Milling of High-Volume Fraction SiCp/Al Composites
    Shi, Zhan-Li
    Xiang, Dao-Hui
    Feng, Hao-Ren
    Wu, Bang-Fu
    Zhang, Zhi-Meng
    Gao, Guo-Fu
    Zhao, Bo
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2021, 22 (10) : 1777 - 1789
  • [6] Study on Surface Quality of Al/SiCp Composites with Ultrasonic Vibration High Speed Milling
    Xiang, Daohui
    Zhi, Xintao
    Yue, Guangxi
    Gao, Guofu
    Zhao, Bo
    HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN, 2011, 42 : 363 - 366
  • [7] PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites
    Tao Wang
    Lijing Xie
    Xibin Wang
    Zhiwei Ding
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 1445 - 1453
  • [8] Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites
    Cui, Youzheng
    Gao, Shenrou
    Wang, Fengjuan
    Hu, Qingming
    Xu, Cheng
    Xu, Fengxia
    MATERIALS, 2021, 14 (15)
  • [9] PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites
    Wang, Tao
    Xie, Lijing
    Wang, Xibin
    Ding, Zhiwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (9-12): : 1445 - 1453
  • [10] Performance of Cutting Tools in High Speed Milling of SiCp/Al Composites
    Wang, Yang Jun
    Pan, Ming Qiang
    Chen, Tao
    Liu, Ji Zhu
    Chen, Li Guo
    MANUFACTURING ENGINEERING AND AUTOMATION II, PTS 1-3, 2012, 591-593 : 311 - 314
12345