STUDY ON THE STANDARDIZED NONLINEAR FINITE ELEMENT ANALYSIS OF THE ULTIMATE STRENGTH OF SHIP HULL GIRDER

被引：0
|
作者：
Feng Guoqing [1 ]
Ren Huilong [1 ]
Bai Baoqiang [1 ]
Li Chenfeng [1 ]
Liu Xiaobo [1 ]
机构：
[1] Harbin Engn Univ, Coll Shipbldg Engn, Harbin 150001, Heilongjiang, Peoples R China
来源：
OMAE 2009, VOL 2: STRUCTURES, SAFETY AND RELIABILITY | 2009年
关键词：
D O I：
暂无
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
The ultimate strength of ship hull girder has been a study hot spot in ship mechanics. Caldwell method, Smith method, idealized structural unit method and nonlinear finite element method are usually used to predict the ultimate strength of ship hull girder. In the paper, a standardized procedure on the nonlinear finite element analysis of the ultimate strength of ship hull girder is presented. Firstly, the finite element modeling for the ultimate strength of ship hull girder is studied, which include material property, element type, mesh size, model length and boundary conditions. Then, the influence of welding residual stress and initial deflection are studied. For the validation of the method in this paper, a MST-3 model from the test of Nishihara is used as an example. Finally, the results from the nonlinear finite element analysis and Smith method are compared for the ultimate strength analysis of a container ship. The study shows the standardized procedure on the nonlinear finite element analysis of the ultimate strength of ship hull girder is satisfactory and suitable for engineering application.
引用
收藏
页码：561 / 566
页数：6
相关论文
共 50 条
  • [1] Assessment of the hull girder ultimate strength of a bulk carrier using nonlinear finite element analysis
    Shu, Z.
    Moan, T.
    ANALYSIS AND DESIGN OF MARINE STRUCTURES, 2009, : 173 - +
  • [2] FINITE ELEMENT ANALYSIS ON THE HULL GIRDER ULTIMATE STRENGTH OF ASYMMETRICALLY DAMAGED SHIPS
    Alie, Muhammad Zubair Muis
    Sitepu, Ganding
    Sade, Juswan
    Mustafa, Wahyuddin
    Nugraha, Andi Mursid
    Saleh, Alamsyah Bin Muh.
    PROCEEDINGS OF THE ASME 35TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING , 2016, VOL 3, 2016,
  • [3] Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - A case study Part 1: Nonlinear finite element modelling and ultimate hull girder capacity
    Amlashi, Hadi K. K.
    Moan, Torgeir
    MARINE STRUCTURES, 2008, 21 (04) : 327 - 352
  • [4] Ultimate strength of a box girder simulating the hull of a ship
    Akhras, G
    Gibson, S
    Yang, S
    Morchat, R
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1998, 25 (05) : 829 - 843
  • [5] Ultimate strength of ship hull girder with grounding damage
    Tabri, Kristjan
    Naar, Hendrik
    Korgesaar, Mihkel
    SHIPS AND OFFSHORE STRUCTURES, 2020, 15 (S1) : S161 - S175
  • [6] Finite element analysis of the ultimate torsional moment of a hull girder
    Zhang, Ai-Feng
    Wan, Zheng-Quan
    Chuan Bo Li Xue/Journal of Ship Mechanics, 2004, 8 (05): : 100 - 108
  • [7] Study on influence of nonlinear finite element method models on ultimate bending moment for hull girder
    Xu, Ming Cai
    Song, Zhao Jun
    Pan, Jin
    THIN-WALLED STRUCTURES, 2017, 119 : 282 - 295
  • [8] AN APPROXIMATE CALCULATION APPROACH FOR ULTIMATE STRENGTH OF SHIP HULL GIRDER
    Li, Chenfeng
    Ren, Huilong
    Zhao, Zhongqiu
    Zhao, Xiaodong
    Zeng, Ji
    Xu, Donghao
    PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 2B, 2013,
  • [9] Procedure for calculating hull girder ultimate strength of ship structures
    Haihong Sun
    Xiaozhi Wang
    Marine Systems & Ocean Technology, 2005, 1 (3) : 137 - 143
  • [10] Study on ultimate strength of ship's hull considering cross section and beam finite element
    Alie, Muhammad Zubair Muis
    Juswan
    Wahyuddin
    Rachman, Taufiqur
    5TH INTERNATIONAL SEMINAR ON OCEAN AND COASTAL ENGINEERING, ENVIRONMENTAL AND NATURAL DISASTER MANAGEMENT (ISOCEEN 2017), 2018, 177
12345