Failure strength prediction of glass/epoxy composite laminates from acoustic emission parameters using artificial neural network

被引:63
|
作者
Kumar, C. Suresh [1 ]
Arumugam, V. [1 ]
Sengottuvelusamy, R. [2 ]
Srinivasan, S. [2 ]
Dhakal, H. N. [3 ]
机构
[1] Anna Univ, Dept Aerosp Engn, MIT Campus, Madras 44, Tamil Nadu, India
[2] Anna Univ, Dept Instrumentat Engn, MIT Campus, Madras 44, Tamil Nadu, India
[3] Univ Portsmouth, Sch Engn, Adv Polymer & Composites APC Res Grp, Anglesea Rd,Anglesea Bldg, Portsmouth PO1 3DJ, Hants, England
关键词
GFRP composite laminates; Acoustic emission; Seawater degradation; Artificial neural network; RBFNN; GRNN; MODES; IDENTIFICATION; FATIGUE; DAMAGE; ANN;
D O I
10.1016/j.apacoust.2016.08.013
中图分类号
O42 [声学];
学科分类号
070206 ; 082403 ;
摘要
The ageing effect of glass/epoxy composite laminates exposed to seawater environment for different periods of time was investigated using acoustic emission (AE) monitoring. The mass gain ratio and flexural strength of glass fiber reinforced plastic (GFRP) composite laminates were examined after the seawater treatment. The flexural strength of the seawater treated GFRP specimens showed a decreasing trend with increasing exposure time. The degradation effects of seawater are studied based on the changes in AE signal parameters for various periods of time. The significant AE parameters like counts, energy, signal strength, absolute energy and hits were considered as training data input. The input data were taken from 40% to 70% of failure loads for developing the radial basis function neural network (RBFNN) and generalised regression neural network (GRNN) models. RBFNN model was able to predict the ultimate failure strength and could be validated with the experimental results with the percentage error well within 0.57.2% tolerance, whereas GRNN model was able to predict the ultimate failure strength with the percentage error well within 0.5-4.4% tolerance. The prediction accuracy of GRNN model is found to be better than RBFNN model. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:32 / 41
页数:10
相关论文
共 50 条
  • [1] Predicting Failure Strength of Randomly Oriented Short Glass Fiber-Epoxy Composite Specimen by Artificial Neural Network Using Acoustic Emission Parameters
    Ramkumar S.
    [J]. Journal of Failure Analysis and Prevention, 2016, 16 (2) : 225 - 234
  • [2] ARTIFICIAL NEURAL NETWORK PREDICTION OF ULTIMATE TENSILE STRENGTH OF RANDOMLY ORIENTED SHORT GLASS FIBRE-EPOXY COMPOSITE SPECIMEN USING ACOUSTIC EMISSION PARAMETERS
    Ramkumar, S.
    [J]. ADVANCED COMPOSITES LETTERS, 2015, 24 (05) : 119 - 124
  • [3] Acoustic Emission Characterisation of Failure Modes in Hemp/Epoxy and Glass/Epoxy Composite Laminates
    Kumar, C. Suresh
    Arumugam, V.
    Sajith, S.
    Dhakal, H. N.
    John, Risil
    [J]. JOURNAL OF NONDESTRUCTIVE EVALUATION, 2015, 34 (04) : 1 - 11
  • [4] Acoustic Emission Characterisation of Failure Modes in Hemp/Epoxy and Glass/Epoxy Composite Laminates
    C. Suresh Kumar
    V. Arumugam
    S. Sajith
    H. N. Dhakal
    Risil John
    [J]. Journal of Nondestructive Evaluation, 2015, 34
  • [5] Optimization of acoustic emission parameters to discriminate failure modes in glass-epoxy composite laminates using pattern recognition
    Chelliah, Suresh Kumar
    Parameswaran, Pabitha
    Ramasamy, Sengottuvelusamy
    Vellayaraj, Arumugam
    Subramanian, Srinivasan
    [J]. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2019, 18 (04): : 1253 - 1267
  • [6] First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model
    Ang, J. Y.
    Majid, M. S. Abdul
    Nor, A. Mohd
    Yaacob, S.
    Ridzuan, M. J. M.
    [J]. COMPOSITE STRUCTURES, 2018, 200 : 579 - 588
  • [7] Artificial neural network a tool for predicting failure strength of composite tensile coupons using acoustic emission technique
    S. Rajendraboopathy
    T. Sasikumar
    K. M. Usha
    E. S. Vasudev
    [J]. The International Journal of Advanced Manufacturing Technology, 2009, 44 : 399 - 404
  • [8] Artificial neural network a tool for predicting failure strength of composite tensile coupons using acoustic emission technique
    Rajendraboopathy, S.
    Sasikumar, T.
    Usha, K. M.
    Vasudev, E. S.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (3-4): : 399 - 404
  • [9] The Flexural Strength Prediction of Carbon Fiber/Epoxy Composite Using Artificial Neural Network Approach
    Phunpeng, Veena
    Saensuriwong, Karunamit
    Kerdphol, Thongchart
    Uangpairoj, Pichitra
    [J]. MATERIALS, 2023, 16 (15)
  • [10] Prediction of impact damage tolerance of drop impacted WGFRP composite by artificial neural network using acoustic emission parameters
    Ramasamy, P.
    Sampathkumar, S.
    [J]. COMPOSITES PART B-ENGINEERING, 2014, 60 : 457 - 462