High power density, high efficiency 1 W SiGe power HBT for 2.4 GHz power amplifier applications

In this paper, an improved layout and thermal management of eight unit-cells SiGe power HBT with emitter area of 8 x 0.6 x 10 mu m(2) were designed for high power density and efficiency performance. The on-wafer power characteristics were measured using all ATN loadpull system under class-AB operation at 2.4 GHz. The power HBT achieved a 1-dB compression power (P-1 (dB)) of 27.3 dBm and a saturation output power (P-sat) of 30 dBm which was correspond to a power density of 2.6 mW/mu m(2) for the emitter area. A high peak power added efficiency (PAE(max)) of up to 75% was obtained, with a power gain of 11.4 dB at a P3-dB of 29.0 dBm. In addition, the real part of the source impedance (R-in) was measured to be as high as 28 Omega. The impedance transfer ratio, R-in/R-system is only 0.56 which relaxes the need for a high quality passive component (inductor) for on-chip input matching. This advantage makes it easier for the HBT to be integrated with other silicon-based transceiver in an RF System-on-Chip (SoC) design. (c) 2007 Elsevier Ltd. All rights reserved.