The effect of catalyst precursors and conditions of preparing Pt and Pd-Pt catalysts on their activity in the oxidation of hexane

The effectiveness of under-air n-hexane oxidation over monolithic catalysts made of heatresistant foil, containing Pt, Pd or Pt-Pd, was compared. Pt and Pd precursors, either containing chlorine or devoid of chlorine, were used to prepare the catalysts. The chlorinecontaining Pt (H-2 PtCl6) and Pd (PdCl2) precursors were found to lower the activity of the catalysts in hexane oxidation. Studies of the effect of 0.15% Pt/Al2O3 catalyst ( using H2 PtCl 6 as the precursor) calcination conditions on catalyst activity showed the catalyst calcined in static air at 500 degrees C to be the most active. Airflow calcination of the catalyst does not change its catalytic properties. In comparison with the 0.5% Pd/Al2O3 catalyst obtained from Pd(NO3)(2), the use of a bimetallic 0.5% Pd/0.1% Pt/Al2O3 catalyst, in which the precursors were Pd( NO 3) 2 and Pt( NO3)(4), resulted in the lowering of 10% and 50% n-hexane temperature by 15 degrees C and 10 degrees C.