Mathematical Model for Predicting Flow Stress in Hot Rolling of Alloy Steel

被引：0
|
作者：
Matsumoto, Atsushi [1 ]
Sasaki, Shunsuke [1 ]
Katsumura, Tatsuro [1 ]
Ota, Hiroki [1 ]
机构：
[1] JFE Steel, Steel Res Lab, Handa 4758611, Japan
来源：
MATERIALS TRANSACTIONS | 2017年 / 58卷 / 12期
关键词：
flow stress prediction model; strain rate; temperature; deformation history; alloy steel; RECRYSTALLIZATION; DEFORMATION; AUSTENITE; ELEMENTS;
D O I：
10.2320/matertrans.P-M2017841
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
During the multipass hot processing of alloy steel, restoration processes such as static and dynamic recrystallization and recovery occur. Owing to these phenomena, flow stress characteristics are affected by various deformation conditions, such as temperature and accumulated strain. The objective of this research is to develop a mathematical model for predicting flow stress to represent these effects by simply considering the processing history and restoration. Hot compression experiments were conducted and the results were compared with the predicted results. It was found that the prediction accuracy can be improved by simultaneously considering the effects of accumulated strain and restoration.
引用
收藏
页码：1640 / 1646
页数：7
相关论文
共 50 条
  • [1] Flow Stress Evaluation in Hot Rolling of Steel
    Aghasafari, P.
    Salimi, M.
    Daraei, A.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (08) : 2819 - 2828
  • [2] Flow Stress Evaluation in Hot Rolling of Steel
    P. Aghasafari
    M. Salimi
    A. Daraei
    [J]. Journal of Materials Engineering and Performance, 2014, 23 : 2819 - 2828
  • [3] Study on flow stress model of a microalloyed high strength steel in CSP hot rolling
    Xu, Guang
    Wan, Lun
    Zhang, Xinqiang
    Xue, Zhengliang
    [J]. PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING, PTS 1 AND 2, 2008, 575-578 : 267 - +
  • [4] A new mathematical model for predicting flow stress of typical high-strength alloy steel at elevated high temperature
    Lin, Y. C.
    Liu, Ge
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2010, 48 (01) : 54 - 58
  • [5] Mathematical modelling of hot rolling steel strip
    Colas, R
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 1998, 14 (05) : 388 - 393
  • [6] Mathematical modeling of structurization in hot rolling of steel
    Shkatov, VV
    Frantsenyuk, LI
    Bogomolov, IV
    [J]. STEEL IN TRANSLATION, 1995, 25 (08) : 68 - 74
  • [7] A new mathematical model for predicting flow stress up to the critical strain during hot deformation
    Wang, J.
    Yang, H. T.
    Wang, X. G.
    Xiao, H.
    [J]. MATERIALS & DESIGN, 2015, 65 : 637 - 643
  • [8] A new mathematical model for predicting flow stress of X70HD under hot deformation
    王健
    王小巩
    杨海涛
    余超
    肖宏
    [J]. Journal of Central South University, 2015, 22 (06) : 2052 - 2059
  • [9] A new mathematical model for predicting flow stress of X70HD under hot deformation
    Jian Wang
    Xiao-gong Wang
    Hai-tao Yang
    Chao Yu
    Hong Xiao
    [J]. Journal of Central South University, 2015, 22 : 2052 - 2059
  • [10] A new mathematical model for predicting flow stress of X70HD under hot deformation
    Wang Jian
    Wang Xiao-gong
    Yang Hai-tao
    Yu Chao
    Xiao Hong
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2015, 22 (06) : 2052 - 2059
12345