Design Considerations for Integrated, High-Voltage DC-DC Converters

被引:2
|
作者
Salimath, A. [1 ]
Gonano, G. [2 ]
Bonizzoni, E. [1 ]
Brambilla, D. L. [2 ]
Botti, E. [2 ]
Maloberti, F. [1 ]
机构
[1] Univ Pavia, Dept Elect Comp & Biomed Engn, Pavia, Italy
[2] STMicroelectronics, Automot & Discrete Grp, Cornaredo, MI, Italy
关键词
D O I
10.1109/ISCAS.2018.8351566
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper presents two design considerations for integrated high-voltage DC-DC converters in automobile and industrial applications. The proposed solutions include (i) a quasi soft-start technique using over-current protection (OCP) circuits and limited duty cycle control and (ii) a technique to drive a floating load-side switch that suppresses the effect of bond-wire bouncing on its gate-source voltage. The first technique avoids the conventional, overhead start-up circuits and significantly reduces the converter startup time. The second technique gains importance primarily from device reliability viewpoint in high-voltage (HV) conditions. The effectiveness of the proposed techniques has been verified with simulations at the transistor level using a 110-nm BCD technology.
引用
收藏
页数:5
相关论文
共 50 条
  • [1] Integrated All-GaN Driver for High-voltage DC-DC Power Converters
    Hsia, Chin
    Li, Chung-Yi
    Lu, Deng-Fong
    Chen, Tzu-Yu
    2023 20TH INTERNATIONAL SOC DESIGN CONFERENCE, ISOCC, 2023, : 175 - 176
  • [2] Investigation of Different Integrated Temperature Monitoring Sensors for High-Voltage SoC DC-DC Converters
    El-Zarif, Nader
    Ali, Mohamed
    Amer, Mostafa
    Hassan, Ahmad
    Oukaira, Aziz
    Lakhssassi, Ahmed
    Fayomi, Christian Jesus B.
    Savaria, Yvon
    2022 20TH IEEE INTERREGIONAL NEWCAS CONFERENCE (NEWCAS), 2022, : 178 - 182
  • [3] Design considerations for high power enductors in DC-DC converters
    Salem, T. E.
    Urciuoh, D. P.
    Lubomirsky, V.
    Ovrebo, G. K.
    APEC 2007: TWENTY-SECOND ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1 AND 2, 2007, : 1258 - +
  • [4] Design considerations for very high frequency dc-dc converters
    Rivas, Juan M.
    Jackson, David
    Leitermann, Olivia
    Sagneri, Anthony D.
    Han, Yehui
    Perreault, David J.
    2006 IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-7, 2006, : 741 - 751
  • [5] Control Method of DC-DC Converters for High-Voltage Feeding Systems
    Yoshii T.
    Morimoto H.
    Ishiyama T.
    Yachida T.
    Akashi D.
    IEEJ Transactions on Industry Applications, 2022, 142 (03) : 222 - 231
  • [6] Evaluation of GaN HEMTs for High-Voltage Stage of Isolated DC-DC Converters
    Chub, Andrii
    Zdanowski, Mariusz
    Blinov, Andrei
    Rabkowski, Jacek
    2016 10TH INTERNATIONAL CONFERENCE ON COMPATIBILITY, POWER ELECTRONICS AND POWER ENGINEERING (CPE-POWERENG), 2016, : 375 - 379
  • [7] Design considerations for surface mountable DC-DC converters
    O'Driscoll, S
    McDermott, B
    APEC'99: FOURTEENTH ANNUAL APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, CONFERENCE PROCEEDINGS, VOLS 1 & 2, 1999, : 318 - 324
  • [8] Optimizing design for low voltage DC-DC converters
    Zhou, XW
    Wang, TG
    Lee, FC
    APEC '97 - TWELFTH ANNUAL APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1 AND 2, 1997, : 612 - 616
  • [9] Analysis, design and implementation of a high-voltage gain DC-DC converter
    Lin, Bor-Ren
    Tung, Chia-Yu
    INTERNATIONAL JOURNAL OF CIRCUIT THEORY AND APPLICATIONS, 2014, 42 (01) : 1 - 14
  • [10] Optimal design of monolithic integrated DC-DC converters
    Schrom, G.
    Hazucha, P.
    Paillet, F.
    Gardner, D. S.
    Moon, S. T.
    Karnik, T.
    2006 IEEE INTERNATIONAL CONFERENCE ON INTEGRATED CIRCUIT DESIGN AND TECHNOLOGY, PROCEEDINGS, 2006, : 65 - +