Influence of treatment conditions on the corrosion resistance of low temperature nitrided austenitic stainless steels

被引：0
|
作者：
Borgioli, F. [1 ]
Galvanetto, E. [1 ]
Caporali, S. [1 ]
Gabellini, L. [1 ]
Bacci, T. [1 ]
机构：
[1] Univ Firenze, Florence, Italy
来源：
METALLURGIA ITALIANA | 2022年 / 114卷 / 02期
关键词：
NITRIDING; S PHASE; AUSTENITIC STAINLESS STEELS; LOCALISED CORROSION; ELECTROCHEMICAL-BEHAVIOR;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Low temperature nitriding is an effective method of surface modification of austenitic stainless steels, which allows to improve their surface hardness and tribological properties, but the treatment conditions depend on steel composition. In this research the influence of nitriding conditions on the microstructural, mechanical and corrosion resistance characteristics of the modified surface layers has been evaluated for a Ni-free steel, UNS S29225, and, for comparison, for AISI 316L and AISI 202 steels. The modified surface layers consist mainly of the so called S phase. Ni-free steel is more sensitive to nitride precipitation than AISI 316L, so that treatments should be carried out at temperatures lower than 400 degrees C. By choosing the appropriate nitriding temperature and duration it is possible to obtain a significant increase of corrosion resistance in a 5% NaCl solution, in comparison with the untreated alloy.
引用
收藏
页码：7 / 12
页数：6
相关论文
共 50 条
  • [1] In vitro corrosion resistance of plasma source ion nitrided austenitic stainless steels
    Lei, MK
    Zhu, XM
    BIOMATERIALS, 2001, 22 (07) : 641 - 647
  • [2] CORROSION-RESISTANCE OF HIGHLY NITRIDED AUSTENITIC STAINLESS-STEELS, ALLOYED WITH PALLADIUM
    TOMASHOV, ND
    LAKOMSKII, VI
    CHERNOVA, GP
    TORKHOV, GF
    CHIGIRINSKAYA, LA
    SLYSHANKOVA, VA
    PROTECTION OF METALS, 1977, 13 (01): : 6 - 11
  • [3] Low temperature plasma carburising of austenitic stainless steels for improved wear and corrosion resistance
    Sun, Y
    Li, X
    Bell, T
    SURFACE ENGINEERING, 1999, 15 (01) : 49 - 54
  • [4] Hemocompatibility evaluation of plasma-nitrided austenitic stainless steels at low temperature
    Lin, Yun-Ho
    Lan, Wen-Chien
    Ou, Keng-Liang
    Liu, Cheng-Ming
    Peng, Pei-Wen
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (23): : 4785 - 4790
  • [5] Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels
    Borgioli, Francesca
    Galvanetto, Emanuele
    Bacci, Tiberio
    MATERIALS CHARACTERIZATION, 2014, 95 : 278 - 284
  • [6] Corrosion of low-temperature nitrided molybdenum-bearing stainless steels
    Kuczynska-Wydorska, M.
    Flis-Kabulska, I.
    Flis, J.
    CORROSION SCIENCE, 2011, 53 (05) : 1762 - 1769
  • [7] Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
    Mareci, Daniel
    Strugaru, Sorin Iacob
    Munteanu, Corneliu
    Bolat, Georgiana
    Souto, Ricardo M.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (03) : 267 - 274
  • [8] Influence of Molybdenum and Phosphorus on the Stress Corrosion Resistance of Austenitic Stainless Steels.
    Faty, Sana
    Da Cunha Belo, M.
    Metaux corrosion-industries, 1982, 57 (681): : 173 - 179
  • [9] SURFACE CHARACTERISTICS OF LOW-TEMPERATURE GAS NITRIDED 316 Ti AUSTENITIC STAINLESS STEELS
    Celik, Ozgur
    Kayali, Eyup Sabri
    Cimenoglu, Huseyin
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 305 - 311
  • [10] INFLUENCE OF PROCESS PARAMETERS ON THE CORROSION RESISTANCE OF CORRUGATED AUSTENITIC AND DUPLEX STAINLESS STEELS
    Alvarez, Sandra M.
    Bautista, Asuncion
    Velasco, Francisco
    MATERIALI IN TEHNOLOGIJE, 2013, 47 (03): : 317 - 321
12345