Long-term porosity and retreatability of oval-shaped canals obturated using two different methods with a novel tricalcium silicate sealer

Objective To evaluate the percentage volume of voids and gaps in oval-shaped canals obturated using two different methods with a tricalcium silicate-based sealer after short- or long-term storage. The long-term effect of storage on the efficiency of removing filling material was also investigated. Materials and methods Forty premolar teeth with oval-shaped canals were instrumented to Reciproc R25 and obturated using single cone obturation (SCO) or warm vertical compaction (WVC) techniques with gutta-percha and HiFlow sealer. The specimens were stored at 100% humidity and 37 degrees C for 2 weeks or 6 months and scanned using micro-computed tomography. Initial retreatment was performed up to a Reciproc R40, and the operating time was recorded. The residual material in the canal received a supplementary procedure using XP-endo Finisher R (XPFR) files. After each retreatment procedure, the specimens were rescanned. Results The percentage volume of voids and gaps in the SCO group was higher than that of the WVC group at both 2 weeks and 6 months (P < 0.05). The percentage volume of the filling material removed after initial retreatment and XPFR cleaning was significantly higher in the 6-month group than in the 2-week groups (P < 0.05). The proportion of the residual material decreased significantly when XPFR files were used, compared to the initial retreatment group (P < 0.05) in both storage times. Conclusion The efficiency of retreatment in the oval-shaped canal was closely related to the storage time rather than the filling technique using a tricalcium silicate sealer. The XPFR instrument proved effective in the removal of the remaining materials from the oval-shaped canal.