Field Tube to Tube Butt Welding Procedure for Coiled Tubing

被引：0

作者：

Liu, Yanming ^{[1
]}

Liu, Mingyue ^{[2
]}

机构：

[1] Xian Shiyou Univ, Key Lab Mat Proc Engn, Xian 710065, Shaanxi, Peoples R China

[2] Xian Univ Finance & Econ, Xingzhi Coll, Xian 710038, Shaanxi, Peoples R China

来源：

PROCEEDINGS OF THE 2017 7TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING (ICADME 2017) | 2017年 / 136卷

关键词：

Coiled tubing; Butt Welding; Welding Procedure; Welding fixture; Heat input; Thermal control;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Coiled tubing with higher strength and larger diameter is widely used in oil and gas engineering. Local damage generated during its working operation will decrease the fatigue life and strength, but replacement will introduce with extra cost. In order to repair the damaged part with lower cost or obtain longer coiled tubing, tube to tube butt TIG welding is adopted. This paper described characteristics of field butt welding and summarized welding sequence. Groove type and preparing, type and diameter of welding wire, welding position, type and flow rate of shielding gas and diameter of welding electrode are all determined. Grain refinement measurements, heat input and welding thermal cycle control method are specified. The welding process has excellent repeatability, the soundness and integrity of weld joint can be guaranteed. The experiment results showed that lower heat input and multi-layer welding can increase fatigue life of welded joint.

引用

下载

页码：54 / 58

页数：5

共 50 条

[1] Butt welding of tube reducers 'steel-titanium'
Sidyakin, V.A.
Pechenkin, D.K.
Arbuzov, V.M.
Khaustov, V.S.
Svarochnoe Proizvodstvo, 2004, (07): : 17 - 21
[2] Optimizing the welding parameters for Straight tube butt welding of dissimilar metals
Ahilan, C.
Kumar, S. Santhosh
Kumar, S. Ramesh
Gudoos, S. Abdul
Selvaraj, Senthil Kumaran
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 7588 - 7595
[3] Numerical analysis of ERW welding residual stress field for coiled tubing
Li, Jihong
Wang, Wenwu
Zhao, Pengkang
Zhang, Min
Hanjie Xuebao/Transactions of the China Welding Institution, 2011, 32 (10): : 73 - 76
[4] TUBE WELDING WITH A PULSED MAGNETIC FIELD
DUDIN, AA
WELDING PRODUCTION, 1971, 18 (02): : 24 - &
[5] PROPERTIES OF SEAMS WITH ELECTRON-BEAM WELDING OF TUBING TO TUBE SHEETS
BURAVLEV, YM
IVANENKO, VV
SAMOILENKO, ZA
DAROVSKIKH, EG
METAL SCIENCE AND HEAT TREATMENT, 1978, 20 (3-4) : 237 - 240
[6] Influence of heat input on toughness in coarse grain zone of QT900 coiled tubing butt welding
Shi, Kai (kshi@xsyu.edu.cn), 1600, Harbin Research Institute of Welding (38):
[7] Tube welding using the pressure balancing technique - A look at issues that helped process and procedure selection for welding heavywall, small-diameter tubing
Brunning, A
WELDING JOURNAL, 2005, 84 (06) : 26 - 32
[8] TUBE TO TUBE SHEET WELDING TECHNIQUES
BEVEVINO, JW
CHEMICAL ENGINEERING PROGRESS, 1974, 70 (07) : 71 - 73
[9] DISPERSION AND UPTAKE IN A COILED TUBE
KAYE, SR
KAVAFYAN, P
SCHROTER, RC
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 1993, 115 (01): : 125 - 126
[10] A coiled nasogastric tube in a newborn
Manikoth, P
Nair, AK
Zachariah, N
Sajwani, MJ
JOURNAL OF PERINATAL MEDICINE, 2005, 33 (04) : 367 - 367

← 1 2 3 4 5 →