A theory of viscoplasticity for fabric-reinforced composites

被引:26
|
作者
Spencer, AJM [1 ]
机构
[1] Univ Nottingham, Div Theoret Mech, Sch Math Sci, Nottingham NG7 2RD, England
关键词
forming; anisotropic material; constitutive behaviour; fabric-reinforced composite material; viscoplastic material;
D O I
10.1016/S0022-5096(01)00073-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Some composite structures are constructed by impregnating sheets of fabric with a matrix material, and forming into a desired shape at a temperature at which the matrix flows easily. Here constitutive equations are formulated for flow of fabric-reinforced composite materials that exhibit viscoplastic response at the forming temperature. The theory is the analogue, for materials with material symmetries appropriate for fabric-reinforced materials, of the theory of Bingham solids for isotropic materials. The theory is formulated for general three-dimensional deformations, but simplifies greatly when specialised to the case of plane stress. In this case, the rheological behaviour is described by a single plasticity parameter and a single viscosity; these are functions of the current angle between the two families of fibres that form the fabric. The analysis is applied to the analysis of the 'picture-frame' experiment, and it is shown that this experiment provides a method of measuring the response functions. The effect of symmetry of the fabric architecture is considered, and it is found that for some practical fabric architectures the theory allows the possibility of different responses to in-plane shearing in different shearing directions, as has been observed in picture-frame experiments. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
下载
收藏
页码:2667 / 2687
页数:21
相关论文
共 50 条
  • [1] Theory of fabric-reinforced viscous fluids
    Spencer, AJM
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (12) : 1311 - 1321
  • [2] Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
    Striewe, J.
    Reuter, C.
    Sauerland, K. -H.
    Troester, T.
    THIN-WALLED STRUCTURES, 2018, 123 : 501 - 508
  • [3] Stamp forming of fabric-reinforced thermoplastic composites
    Hou, M
    POLYMER COMPOSITES, 1996, 17 (04) : 596 - 603
  • [4] Fatigue response of fabric-reinforced polymeric composites
    Natarajan, V
    GangaRao, HVS
    Shekar, V
    JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (17) : 1541 - 1559
  • [5] Potential fabric-reinforced composites: a comprehensive review
    Hasan K.M.F.
    Horváth P.G.
    Alpár T.
    Hasan, K. M. Faridul (k.m.faridul.hasan@phd.uni-sopron.hu); Alpár, Tibor (alpar.tibor@uni-sopron.hu), 1600, Springer (56): : 14381 - 14415
  • [6] Viscoplastic deformation of cotton fabric-reinforced polypropylene composites
    Shao, Bo
    Wang, Fengqiang
    Qian, Wei
    Fang, Yiqun
    Wang, Qingwen
    POLYMER COMPOSITES, 2022, 43 (10) : 7450 - 7462
  • [7] On the abrasive wear behaviour of fabric-reinforced polyetherimide composites
    Bijwe, J
    Indumathi, J
    Ghosh, AK
    WEAR, 2002, 253 (7-8) : 768 - 777
  • [8] Toughened carbon fiber fabric-reinforced pCBT composites
    Abt, Tobias
    Karger-Kocsis, Jozsef
    Sanchez-Soto, Miguel
    POLYMER COMPOSITES, 2016, 37 (05) : 1453 - 1460
  • [9] AN INELASTIC BIAXIAL CONSTITUTIVE MODEL FOR FABRIC-REINFORCED COMPOSITES
    THOMAS, S
    STUBBS, N
    JOURNAL OF COATED FABRICS, 1984, 13 (03): : 144 - 160
  • [10] A continuum constitutive model for the simulation of fabric-reinforced composites
    Martin-Santos, E.
    Maimi, P.
    Gonzalez, E. V.
    Cruz, P.
    COMPOSITE STRUCTURES, 2014, 111 : 122 - 129