Integrated mechanical-metallurgical approach to modeling of solidification cracking in welds

被引：26

作者：

Ploshikhin, V ^{[1
]}

Prikhodovsky, A ^{[1
]}

Makhutin, M ^{[1
]}

Ilin, A ^{[1
]}

Zoch, HW ^{[1
]}

机构：

[1] Neue Mat Bayreuth GmbH, Bayreuth, Germany

来源：

HOT CRACKING PHENOMENA IN WELDS | 2005年

关键词：

D O I：

10.1007/3-540-27460-X_12

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The presented approach is based on experimental observations which clearly show that the hot cracking phenomenon is a result of accumulation of macroscopic tensile strains in a microscopic intergranular film of liquid enriched with segregating elements at the final stage of solidification. The modeling takes into account the effects of strain accumulation as well as the influence of the microstructure and the thermo-dynamical properties of the welded material. The integrated approach provides a clear phenomenological inter-relation between parameters of the welding process, properties of the welded material and the cracking susceptibility. It is successfully used for the development of technological means, such as a multi-beam welding, for eliminating solidification cracking.

引用

页码：223 / 244

页数：22

共 50 条

[1] Interpretation and metallurgical modeling of hot ductility curve for solidification cracking
YAMASHITA S.
SAIDA K.
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 38 (04): : 275 - 290
[2] SOLIDIFICATION CRACKING IN MIG FILLET WELDS
BAILEY, N
METAL CONSTRUCTION AND BRITISH WELDING JOURNAL, 1974, 6 (05): : 143 - 147
[3] Solidification cracking in austenitic stainless steel welds
V. Shankar
T. P. S. Gill
S. L. Mannan
S. Sundaresan
Sadhana, 2003, 28 : 359 - 382
[4] FUNDAMENTALS OF SOLIDIFICATION CRACKING IN WELDS .1.
BORLAND, JC
WELDING AND METAL FABRICATION, 1979, 47 (01): : 19 - &
[5] FUNDAMENTALS OF SOLIDIFICATION CRACKING IN WELDS .2.
BORLAND, JC
WELDING AND METAL FABRICATION, 1979, 47 (02): : 99 - &
[6] Solidification cracking in austenitic stainless steel welds
Shankar, V
Gill, TPS
Mannan, SL
Sundaresan, S
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2003, 28 (3-4): : 359 - 382
[7] Solidification cracking in low alloy steel welds
Shankar, V
Devletian, JH
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (02) : 236 - 243
[8] Mechanical-Metallurgical Approach to Prediction of Liquation Crack Initiation in Al-Mg-Si Alloy Welded Joints
Hiltunen, E.
Martikainen, J.
Karkhin, V. A.
Ivanov, S. Yu
MECHANIKA 2011: PROCEEDINGS OF THE 16TH INTERNATIONAL CONFERENCE, 2011, : 115 - +
[9] Operational Procedures to Reduce Solidification Cracking in Welds.
Guerra, Ivan
Rogerson, John
Metalurgia ABM, 1986, 42 (339): : 71 - 78
[10] Mechanical and metallurgical properties of MMC friction welds
Li, Z
Maldonado, C
North, TH
Altshuller, B
WELDING JOURNAL, 1997, 76 (09) : S367 - S373

← 1 2 3 4 5 →