Effects of negative bias voltage on structure and mechanical properties of DLC films synthesized by FCVA deposition

被引:7
|
作者
Wen, F. [1 ]
Huang, N. [2 ]
Sun, H. [2 ]
Cao, Y. [1 ]
机构
[1] Hainan Univ, Key Lab, Minist Educ Applicat Technol Chem Mat Hainan Supe, Sch Mat & Chem Engn, Haikou 570228, Peoples R China
[2] Southwest Jiao Tong Univ, Sch Mat Sci & Engn, Chinese Educ Minist, Key Lab Adv Mat Proc, Chengdu 610031, Peoples R China
来源
关键词
DLC films; wear resistant; bias voltage; Raman; XPS; DIAMOND-LIKE CARBON; COATINGS;
D O I
10.4028/www.scientific.net/AMR.287-290.2203
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Diamond-like carbon (DLC) films have been given great attention in the last twenty years and applied in many fields due to its super mechanical property. In this paper, DLC films were prepared by filter cathodic vacuum arc (FCVA) deposition under different negative bias voltage. No spalling was found in all of as-prepared DLC films. X-ray photoelectron spectroscopy (XPS), Raman spectra were employed to analyze composition and structure, the results showed that as-prepared DLC films had tendency of graphite with increase of negative bias voltage. Mechanical properties were characterized by micro-hardness and pin-on disc tests, the results showed that the hardness of DLC films decreased with bias voltage, but still kept good wear resistant.
引用
收藏
页码:2203 / +
页数:2
相关论文
共 50 条
  • [1] Dual FCVA-PECVD deposition for DLC films
    Meunier, C
    Munnik, F
    Stauffer, J
    Germann, E
    Mikhailov, S
    THIN SOLID FILMS, 2005, 482 (1-2) : 197 - 200
  • [2] Effects of negative low substrate bias voltage on the structure and properties of fluorinated amorphous carbon films synthesized by plasma immersion ion implantation and deposition
    Yao, ZQ
    Yang, P
    Huang, N
    Sun, H
    Wang, J
    SURFACE & COATINGS TECHNOLOGY, 2004, 186 (1-2): : 131 - 135
  • [3] Effects of different Ti-interlayer deposition time and bias voltage on the adhesive and tribological properties of DLC films
    Shi, Zhi-Feng
    Huang, Nan
    Sun, Hong
    Zhu, Sheng-Fa
    Gongneng Cailiao/Journal of Functional Materials, 2008, 39 (08): : 1340 - 1343
  • [4] Effects of post-deposition annealing on structure and mechanical properties of multilayer Ti/DLC films
    Song, Zicheng
    Liu, Yiming
    Jiang, Shangzhe
    Jiang, Xiaohong
    Piliptsou, D. G.
    Rogachev, A. V.
    DIAMOND AND RELATED MATERIALS, 2024, 147
  • [5] Bias effects on structure and piezoresistive properties of DLC:Ag thin films
    Meskinis, S.
    Vasiliauskas, A.
    Slapikas, K.
    Gudaitis, R.
    Andrulevicius, M.
    Ciegis, A.
    Niaura, G.
    Kondrotas, R.
    Tamulevicius, S.
    SURFACE & COATINGS TECHNOLOGY, 2014, 255 : 84 - 89
  • [6] Effects of deposition bias voltage on microstructure and mechanical properties of pulsed laser deposited CNx films
    Yang, Fanger
    Chen, Zhanling
    Zheng, Xiaohua
    Song, Jianqiang
    Shen, Tao
    Dong, Zhaohui
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2013, 41 (09): : 1265 - 1270
  • [7] Effects of bias voltage on the structure, mechanical properties and tribological properties of TaBx films at elevated temperatures
    Sun, Longlong
    Li, Hang
    Wei, Ningxin
    Li, Jianliang
    Huang, Jiewen
    Kong, Jian
    Wu, Qiujie
    Shi, Yan
    Xiong, Dangsheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 118
  • [8] The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA
    Wang, Peng
    Wang, Xia
    Chen, Youming
    Zhang, Guangan
    Liu, Weimin
    Zhang, Junyan
    APPLIED SURFACE SCIENCE, 2007, 253 (07) : 3722 - 3726
  • [9] Structure and characterization of the multilayered Ti-DLC films by FCVA
    Lin, Yu-Hung
    Lin, Hong-Da
    Liu, Chun-Kuo
    Huang, Meng-Wen
    Chen, Jiann-Ruey
    Shih, Han C.
    DIAMOND AND RELATED MATERIALS, 2010, 19 (7-9) : 1034 - 1039
  • [10] Influence of negative voltage on the structure and properties of DLC films deposited on NiTi alloys by PBII
    Y. Cheng
    Y. F. Zheng
    Journal of Materials Science, 2006, 41 : 4179 - 4183