Uricase-adsorbed carbon-felt reactor coupled with a peroxidase-modified carbon-felt-based H2O2 detector for highly sensitive amperometric flow determination of uric acid

Uricase Curate oxidase, UOx) was adsorbed onto a porous carbon-felt (CF) surface and the resulting UOx-adsorbed CF (UOx-CF) was successfully used as a column-type enzyme reactor coupled with a peroxidase-adsorbed CF-based bioelectrocatalytic H2O2 flow-detector to fabricate a flow-amperometric biosensor for uric acid. In this flow-biosensor system, H2O2 produced in the UOx-CF reactor was cathodically detected by horseradish peroxidase (HRP) and a thionine (Th)-coadsorbed CF (HRP/Th-CF)-based bioelectrocatalytic flow-detector at -0.05 V vs. Ag/AgCl. Various adsorption conditions of the UOx (i.e., pH of the adsorption solution, type and concentration of the buffer used as the adsorption solvent, UOx concentration and adsorption time) and the operational conditions of the UOx-CF and HRP/Th-CF-coupled flow-biosensor (i.e., carrier flow rate and carrier pH) were optimized to obtain highly sensitive, selective and stable peak current responses to uric acid. The analytical performance of the UOx-CF and HRP/Th-CF-coupled flow biosensor for uric acid was as follows: sensitivity, 0.25 mu A/uM; linear range, 0.3-20 mu M; lower detection limit, 0.18 mu M; and sample throughput, ca. 30-90 samples/h. The resulting amperometric flow-biosensor for uric acid allowed the determination of uric acid in highly diluted body fluids (human serum and urine), and the analytical results obtained by the present biosensor were in fairly good agreement with those obtained by conventional enzyme-based spectrophotometry. (C) 2011 Elsevier B.V. All rights reserved.