Feasibility of a multi-component additive for efficient control of activated sludge filamentous bulking

Instantaneous improvement of the settling of bulking filamentous activated sludge can be achieved by the addition of a polymer or a large amount (up to 100% of the MLSS concentration) of talc powder to the sludge. Long-term improvement relies on repeated additions, as these additives have no adverse effects on the causative filaments. A multi-component additive was compared to the traditional additives in lab-scale activated sludge units using three highly filamentous sludges from different industrial treatment plants. The study demonstrated that the multi-component additive was superior to the traditional remedies. It was shown that, in the case of severe filamentous bulking, a single addition of the neu additive immediately improved sludge settling and exerted a destructive effect on the causative filamentous bacteria. Thus. the latter additive also ensured a long-term sludge sedimentation improvement. The traditional additives exhibited an immediate and short-term effect. The node additive also retarded sludge rising due to denitrification and it improved sludge dewaterability. The study revealed Nostocoidal limicola II, with slightly hydrophobic cell wall, to be somewhat resistant to the quaternary ammonium salt present as biocide in the additive. (C) 1001 Elsevier Science Ltd. All rights reserved.