Monotonic shear tests of cold-formed steel wall frames with sheathing

被引：74
|
作者：
Pan, Chi-Ling [1 ]
Shan, Ming-Yang [2 ]
机构：
[1] Chaoyang Univ Technol, Dept Construct Engn, Wufong 413, Taichung Cty, Taiwan
[2] Chen Shui Univ Technol, Dept Civil Engn, Niaosong 833, Kaohsiung Cty, Taiwan
来源：
THIN-WALLED STRUCTURES | 2011年 / 49卷 / 02期
关键词：
Cold-formed steel; Shear test; Wall frame; Ductility ratio; PERFORMANCE;
D O I：
10.1016/j.tws.2010.10.004
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This research is focused on the experimental study of the structural strength of cold-formed steel wall frames with sheathing under monotonic shear loading. Two aspect ratios, 1.0 and 2.0 were utilized in the design of wall specimens. Three different kinds of sheathing material, gypsum board, calcium silicate board, and oriented-strand board, with two different thicknesses (9 and 12 mm) were adopted in the test specimens. The ultimate strength, stiffness, energy absorption, and ductility ratio were studied for each test specimen. In final, the ductility ratios of the cold-formed steel wall frames similar to the wall configuration conducted in this study are proposed. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：363 / 370
页数：8
相关论文
共 50 条
  • [1] Cold-Formed Steel Shear Wall Using Corrugated Steel Sheathing with Slits
    Yu, Cheng
    Zhang, Wenying
    Yu, Guowang
    Wang, Jie
    JOURNAL OF STRUCTURAL ENGINEERING, 2018, 144 (08)
  • [2] Different slit configuration in corrugated sheathing of cold-formed steel shear wall
    Zhang, Wenying
    Mandavian, Mahsa
    Yu, Cheng
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 150 : 430 - 441
  • [3] Monotonic and cyclic loading tests for cold-formed steel wall frames sheathed with calcium silicate board
    Lin, Shin-Hua
    Pan, Chi-Ling
    Hsu, Wei-Ting
    THIN-WALLED STRUCTURES, 2014, 74 : 49 - 58
  • [4] High-strength cold-formed steel framed shear wall with steel sheet sheathing
    Zhang, Wenying
    Xu, Xiangzhi
    Liu, Yang
    Yu, Cheng
    Liu, Xuechun
    Xie, Zhiqiang
    THIN-WALLED STRUCTURES, 2021, 162 (162)
  • [5] In-plane Tests of Cold-Formed Steel Shear Walls Sheathed with Gypsum Sheathing
    Fiorino, Luigi
    Prota, Alessandro
    Nikpour, Amirhossein
    Landolfo, Raffaele
    PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, VOL 2, STESSA 2024, 2024, 520 : 872 - 881
  • [6] Determination of the lateral strength of shear wall panels with cold-formed steel frames
    Martinez, Joel
    Xu, Lei
    ADVANCES IN ENGINEERING STRUCTURES, MECHANICS & CONSTRUCTION, PROCEEDINGS, 2006, 140 : 401 - +
  • [7] Behavior of cold-formed steel wall stud with sheathing subjected to compression
    Ye, Jihong
    Feng, Ruoqiang
    Chen, Wei
    Liu, Wei
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2016, 116 : 79 - 91
  • [8] Axial load capacity of cold-formed steel wall stud with sheathing
    Tian, Y. S.
    Wang, J.
    Lu, T. J.
    THIN-WALLED STRUCTURES, 2007, 45 (05) : 537 - 551
  • [9] Behaviour of a Cold-Formed Steel Shear Wall with Centre-Corrugated Steel Sheathing under Cyclic Loading
    Xie, Zhiqiang
    Shi, Leilei
    Peng, Lingyun
    Zhang, Shi
    Zhou, Daxing
    Zhang, Xiangdong
    Yu, Cheng
    ENGINEERING STRUCTURES, 2024, 318
  • [10] Experimental Investigation of Cold-Formed Steel Framed Shear Wall Using Corrugated Steel Sheathing with Circular Holes
    Yu, Cheng
    Yu, Guowang
    JOURNAL OF STRUCTURAL ENGINEERING, 2016, 142 (12)
12345