Porphyrin-Based Nanoporous Organic Polymers for Adsorption of Carbon Dioxide, Ethane, and Methane

Seeking porphyrin-based nanoporous organic polymers for adsorption and separation of simple molecular gases (e.g., CO2, C2H6, CH4, etc.) is still challenging. Herein, we report three-dimensional porphyrin-based nanoporous organic polymer (PNOP) networks based on tetrahedral-structured building blocks, which represent ideal materials for the adsorption/separation of carbon dioxide (CO2). Two PNOP networks, denoted as PNOP-1 and PNOP-2, have been prepared successfully by a facile one-pot method using pyrrole with the tetrahedral-structured building blocks tetrakis(4-aldehydephenyl)methane (TFPM) and 1,3,5,7-tetrakis(4'-aldehydephenyl)adamantane (TFPAd), respectively. The resulting PNOPs are composed of rough spherical particles and exhibit specific surface areas of up to 830 m(2)/g as well as nanometer-scale pore size of <2 nm. The dense porphyrin structure and high and stable nanoporosity endow the PNOPs with excellent CO2, ethane (C2H6), and methane (CH4) gas adsorption performance. Interestingly, PNOP-1 with tetraphenylmethane units, featuring higher microporous volume and microporous specific surface areas compared to PNOP-2, displays CO2, C2H6, and CH4 gas uptake of up to 160.1, 80.2, and 16.8 mg/g at 273 K and 1 bar, respectively. The values of CO2 adsorption obtained herein exceed those obtained for previously reported PNOP materials. In addition, the developed PNOP-2 contained 1,3,5,7-tetraphenyladamantane units with smaller pore size than PNOP-1, exhibiting CO2/N-2, CO2/CH4, and C2H6/CH4 selectivities as high as 80.1, 11.0, and 25.7, respectively, at 273 K and 1 bar. The results are beneficial for designing and constructing better nanoporous organic polymers derived from tetrahedral-structured building blocks for simple molecular gas adsorption/separation in the future.