The surface microstructure of TiC-(Ti,W)C-WC-Ni cermets sintered in a nitrogen atmosphere

被引：14
|
作者：
Kang, Youngjae [1 ]
Kang, Shinhoo [1 ]
机构：
[1] Seoul Natl Univ, Dept Mat Sci & Eng, Seoul 151744, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 27-28期
关键词：
Solid-solution carbide; Cubic carbide; Surface microstructure; Nitrogen atmosphere; Binder enrichment; TI(C0.7N0.3)-WC-NI SYSTEM; CEMENTED CARBIDES; DISSOLUTION; POWDERS; PHASE; ZONE; HARDMETALS; STABILITY; ALLOYS; GROWTH;
D O I：
10.1016/j.msea.2010.08.006
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of nitrogen and a solid-solution carbide on the surface microstructure of TiC-(Ti,W)C-WC-Ni cermets were investigated. The binder enrichment layer with the cubic carbide was observed at the surface, the formation of which is attributed to the concentration gradient of nitrogen and constituent elements. This tendency is found to decrease as the dissolution rate increases when nano-sized TiC was employed. Coarsening behavior and the formation of a discrete layer were studied as a function of (Ti0.93W0.07)C carbide content and nitrogen pressure. The results were interpreted in terms of the relative thermodynamic stability of the carbide phases in the system. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：7241 / 7246
页数：6
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of TiC-WC-(Ti,W)C-Ni cermets
    Kwon, H.
    Kang, S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 520 (1-2): : 75 - 79
  • [2] Change in the surface microstructure of Ti(C0.5N0.5)-20WC-10Ni-10Co cermets during sintering in a nitrogen atmosphere
    Kim, Seongwon
    Kang, Shinhoo
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (09) : 2974 - 2979
  • [3] Microstructure of Ti(CN)-WC-NbC-Ni cermets
    Ahn, SY
    Kim, SW
    Kang, S
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (04) : 843 - 849
  • [4] Microstructure and fracture toughness of TiC-ZrC-WC-Mo-Ni cermets
    Zhang, Xiaobo
    Liu, Ning
    Rong, Chunlan
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2008, 26 (04): : 346 - 356
  • [5] Effect of WC content on the microstructure and mechanical properties of (Ti, W)(C, N)-Co cermets
    Li, Yan
    Liu, Ning
    Zhang, Xiaobo
    Rong, Chunlan
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2008, 26 (01): : 33 - 40
  • [6] Microstructure and mechanical properties of TiC-TiN-Zr-WC-Ni-Co cermets
    Zhang, Xiaobo
    Liu, Ning
    Rong, Chunlan
    Zhou, Jun
    [J]. CERAMICS INTERNATIONAL, 2009, 35 (03) : 1187 - 1193
  • [7] Effect of nitrogen and secondary carbide on the microstructure and properties of (Ti0.93W0.07)C-Ni cermets
    Rafiaei, Seyed Mandi
    Kim, Jae-Hee
    Kang, Shinhoo
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 44 : 123 - 128
  • [8] Microstructure and mechanical properties of (Ti,W,Ta)C-xMo-Ni cermets
    Chen, Xiao
    Xiong, Weihao
    Qu, Jun
    Yang, Qingqing
    Yao, Zhenhua
    Huang, Yuzhu
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 31 : 56 - 61
  • [9] A review on the microstructure and properties of TiC and Ti(C,N) based cermets
    Aramian, Atefeh
    Sadeghian, Zohreh
    Narimani, Mohammad
    Razavi, Nima
    Berto, Filippo
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 115
  • [10] Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C–Ni Cermets
    Chengliang Han
    Changan Tian
    [J]. Powder Metallurgy and Metal Ceramics, 2014, 53 : 57 - 63
12345