Effect and Optimization of Machine Process Parameters on MRR for EN19 & EN41 materials using Taguchi

被引：14
|
作者：
Vikas [1 ]
Shashikant [1 ]
Roy, A. K. [1 ]
Kumar, Kaushik [1 ]
机构：
[1] Birla Inst Technol, Dept Mech Engn, Ranchi 835215, Bihar, India
来源：
2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014 | 2014年 / 14卷
关键词：
EN19; EN41; EDM; MRR; Taguchi; Design of Experiments; Optimization;
D O I：
10.1016/j.protcy.2014.08.027
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The present work deals with the comparison of the MRR for EN19 and EN41 material in a die sinking EDM machine. The various input factors like Pulse ON time, Pulse OFF time, Discharge current and voltage were considered as the input processing parameters, while the MRR is considered as the output. Optimization using Taguchi method was performed to predict the best combination of inputs towards maximum output. A comparison was done to obtain the effect of these input parameters over the MRR for both the material, and simultaneously the impact of the carbon percentage over the MRR was investigated. It was found that the Discharge current in case of the EN41 material and EN19 material had a larger impact as compare to other processing parameters on the MRR. A relative study of the carbon composition for both the material was also done. (C) 2014 Elsevier Ltd.
引用
收藏
页码：204 / 210
页数：7
相关论文
共 37 条
  • [1] Effect and Optimization of Various Machine Process Parameters on the Surface Roughness in EDM for an EN19 Material using Response Surface Methodology
    Shashikant
    Roy, Apurba Kumar
    Kumar, Kaushik
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 1702 - 1709
  • [2] Comparative Studies on Machinability of MCLA Steels EN19 and EN24 Using Taguchi Optimization Techniques
    Geethanjali, K. S.
    Ramesha, C. M.
    Chandan, B. R.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 25705 - 25712
  • [3] Analysis on effect of nanofluid on process parameters in machining of EN19 steel
    Sateesh, N.
    Subbiah, Ram
    Nookaraju, BCh
    Lakshmi, A. Anitha
    Prashanth, Kumar P.
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 1757 - 1767
  • [4] Multi-objective optimization of EN19 steel milling parameters using Taguchi, ANOVA, and TOPSIS approaches
    Jadhav, Pankaj Krishnath
    Sahai, R.S.N.
    Solanke, Sachin
    Gawande, S.H.
    [J]. Journal of Alloys and Metallurgical Systems, 2024, 7
  • [5] Optimization of Machining Parameters in CNC Turning of Stainless Steel (EN19) By TAGUCHI'S Orthogonal Array Experiments
    Kumar, Vijay M.
    Kumar, Kiran B. J.
    Rudresha, N.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 11395 - 11407
  • [6] Investigation of the effects of the Machining Parameters on Material Removal Rate using Taguchi method in End Milling of Steel Grade EN19
    Parashar, Vishal
    Purohit, Rajesh
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 336 - 341
  • [7] Optimization of Machine Process Parameters in EDM for EN 31 Using Evolutionary Optimization Techniques
    Faisal, Nadeem
    Kumar, Kaushik
    [J]. TECHNOLOGIES, 2018, 6 (02):
  • [8] Surface characteristics of EN19 steel materials by EDM using Graphite mixed Dielectric medium
    Surekha, B.
    Rao, P. Gangadhara
    Bijetha, B.
    Sai, V. Srinivasa
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17895 - 17900
  • [9] Process Parameter Optimization for Minimizing Vibrations and Surface Roughness During Turning EN19 Steel Using Coated Carbide Tool
    Shankar, N. V. S.
    Shankar, H. Ravi
    Kumar, N. Pavan
    Saichandu, K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 24 : 788 - 797
  • [10] Optimization of welding parameters for En8D and SAE1018 materials by Taguchi
    Gajbhiye, Amar M.
    Sonawane, Pavankumar R.
    Karle, Anuja H.
    Campli, Srinidhi
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023,
1234