EVALUATION OF JET IMPACT REGION AND FLUID FORCE GENERATED FROM RUPTURED PIPES (2) EVALUATION OF FLUID FORCE USING COMPUTATIONAL FLUID DYNAMICS ANALYSIS

被引:0
|
作者
Takahashi, Shiro [1 ]
Xu, Qiang [2 ]
Takamura, Noriyuki [2 ]
Morita, Ryo [3 ]
Uchiyama, Yuta [3 ]
Watanabe, Shun [3 ]
机构
[1] Hitachi Ltd, Hitachi, Ibaraki, Japan
[2] Hitachi GE, Hitachi, Ibaraki, Japan
[3] CRIEPI, Yokosuka, Kanagawa, Japan
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Nuclear power plants are designed to avoid damage to their safety installations because of jet impingement when a pipe is ruptured. We have investigated evaluation methods for the design basis of protection of plants against effects of postulated pipe rupture using computational fluid dynamics (CFD) analysis. The steam jet tests obtained using particle image velocimetry (PIV) were conducted in order to verify the CFD analysis. Spread of steam jets could be visualized and the shapes of the steam jets obtained by analysis were almost the same as those by tests. The spread angle of free jet was investigated using CFD analysis. We also measured jet fluid force when a cylindrical structure Was installed downstream from the jet nozzle. Steam jet fluid force obtained by analysis was almost the same as that by tests. We judged the CFD analysis to be applicable to evaluation of jet fluid force generated from ruptured pipes.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] EVALUATION OF JET IMPACT REGION AND FLUID FORCE GENERATED FROM RUPTURED PIPES (3) EVALUATION OF ESTABLISHED STANDARDS
    Xu, Qiang
    Takahashi, Shiro
    Takamura, Noriyuki
    Morita, Ryo
    Uchiyama, Yuta
    Watanabe, Shun
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 3, 2016,
  • [2] EVALUATION OF JET IMPACT REGION AND FLUID FORCE GENERATED FROM RUPTURED PIPES (1) NUMERICAL AND EXPERIMENTAL EVALUATION OF AFFECTED REGION BY STEAM JET
    Morita, Ryo
    Uchiyama, Yuta
    Watanabe, Shun
    Takahashi, Shiro
    Xu, Qiang
    Takamura, Noriyuki
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 3, 2016,
  • [3] EVALUATION OF JET IMPACT REGION AND FLUID FORCE GENERATED FROM RUPTURED PIPES (4) NUMERICAL EVALUATION OF AFFECTED REGION BY FLASHING JET FLOW
    Morita, Ryo
    Watanabe, Shun
    Takahashi, Shiro
    Takamura, Noriyuki
    PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2018, VOL 6B, 2018,
  • [4] Force analysis of plasma fluid generated from lightning discharge
    Key Laboratory for Aerosol-cloud-precipitation of China Meteorological Administration, Nanjing University of Information Science and Technology, Nanjing
    210044, China
    Gaodianya Jishu, 6 (2066-2072): : 2066 - 2072
  • [5] Evaluation of Dynamic Derivatives Using Computational Fluid Dynamics
    Da Ronch, A.
    Vallespin, D.
    Ghoreyshi, M.
    Badcock, K. J.
    AIAA JOURNAL, 2012, 50 (02) : 470 - 484
  • [6] Evaluation of nacelle drag using Computational Fluid Dynamics
    Trapp, Luis Gustavo
    Argentieri, Henrique Gustavo
    JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2010, 2 (02) : 145 - 153
  • [7] Analysis of Hydrodynamic Force Acting on Commercialized Rowing Blades Using Computational Fluid Dynamics
    Aziz, A. M. Y.
    Harun, M. N.
    Syahrom, Ardiyansyah
    Omar, A. H.
    7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
  • [8] Using computational fluid dynamics (CFD) for evaluation of fluid flow through a gate Valve
    Augusto, Pedro Esteves Duarte
    Cristianini, Marcelo
    International Journal of Food Engineering, 2012, 8 (04):
  • [9] Evaluation of the resistance force of magnetorheological fluid damper
    Dragasius, Egidijus
    Grigas, Vytautas
    Mazeika, Darius
    Sulginas, Anatolijus
    JOURNAL OF VIBROENGINEERING, 2012, 14 (01) : 1 - 6
  • [10] Rotordynamic Force Prediction of Centrifugal Compressor Impellers Using Computational Fluid Dynamics
    Moore, J. Jeffrey
    Ransom, David L.
    Viana, Flavia
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2011, 133 (04):