Multi-Closed-Loop Design for Quadrotor path-Tracking Control

被引:0
|
作者
Housny, H. [1 ]
Chater, E. [2 ]
el Fadil, H. [1 ]
机构
[1] Ibn Tofail Univ, Kenitra, Morocco
[2] Mohammed V Univ, Rabat, Morocco
关键词
Fuzzy logic control; robust control; quadrotor system; path-tracking control;
D O I
10.1109/icsc47195.2019.8950659
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper deals with fuzzy logic controller design for quadrotor UAVs, to provide robustness capability for trajectory tracking control. Specifically, a multi-closed-loop control strategy is proposed, where a fuzzy proportional-derivative-like plus an integral action is proposed for controlling the quadrotor system. First, the control design steps are presented for the proposed controller, namely the fuzzy PD-like and the integral control action. Then, all scaling factors control parameters are optimized using PSO algorithm and ITAE criterion. Afterwards, using a trajectory path-tracking simulation scenario, the overall control system performances are investigated in presence of imprecise quadrotor mass parameter due to unknown payload mass disturbance. The performances of the proposed controller are compared to those of conventional PID-based and single fuzzy PD-like controllers. The simulation results show that the proposed multi-closed loop-control is able to stabilize the quadrotor attitude, to achieve better trajectory tracking, and to compensate for unknown payload mass disturbances. Thus, the proposed control strategy for quadrotor UAVs could be considered as an additional robust solution to the control problem design for quadrotor path-tracking problem.
引用
收藏
页码:27 / 32
页数:6
相关论文
共 50 条
  • [1] Path-Tracking Control of Stochastic Quadrotor Aircraft in Three-Dimensional Space
    Do, K. D.
    [J]. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2015, 137 (10):
  • [2] DESIGN OF PATH PLANNING AND TRACKING CONTROL OF QUADROTOR
    Gao, Yi
    Li, Rui
    Shi, Yingjing
    Xiao, Li
    [J]. JOURNAL OF INDUSTRIAL AND MANAGEMENT OPTIMIZATION, 2022, 18 (03) : 2221 - 2235
  • [3] Path-tracking Control of Quadrotor Using Adaptive Critic-based Neurofuzzy Controller
    Ramezani, Mohammad Sajad
    Ajami, Sahand
    Ghafarirad, Hamed
    [J]. 2021 9TH RSI INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM), 2021, : 248 - 254
  • [4] Robust Control Design for Quadrotor Trajectory Path Tracking
    Chater, E.
    Housny, H.
    El Fadil, H.
    [J]. 2019 8TH INTERNATIONAL CONFERENCE ON SYSTEMS AND CONTROL (ICSC'19), 2019, : 21 - 26
  • [5] Accuracy analysis of a multi-closed-loop deployable mechanism
    Yang, Yi
    Luo, Jun
    Zhang, Wuxiang
    Xie, Shaorong
    Sun, Yu
    Li, Hengyu
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (04) : 611 - 621
  • [6] Path-Tracking Control of Tilting Quadrotor UAV Based on Variable Structure Sliding Mode Control Method
    Liu, Qinghua
    Zhang, Ke
    Pan, Yunfan
    Zhang, Huan
    [J]. INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING, 2024, 2024
  • [7] An Accurate Torque Control Strategy for Permanent Magnet Synchronous Motors Based on a Multi-Closed-Loop Regulation Design
    Ji, Feifan
    Song, Qingyu
    Li, Yanjun
    Cao, Ran
    Hredzak, Branislav
    Ban, Mingfei
    Wang, Xu
    Yi, Zhongkai
    [J]. ENERGIES, 2024, 17 (01)
  • [8] Decentralized CRONE control of nonsquare multivariable systems in path-tracking design
    Yousfi, Najah
    Melchior, Pierre
    Lanusse, Patrick
    Derbel, Nabil
    Oustaloup, Alain
    [J]. NONLINEAR DYNAMICS, 2014, 76 (01) : 447 - 457
  • [9] Decentralized CRONE control of nonsquare multivariable systems in path-tracking design
    Najah Yousfi
    Pierre Melchior
    Patrick Lanusse
    Nabil Derbel
    Alain Oustaloup
    [J]. Nonlinear Dynamics, 2014, 76 : 447 - 457
  • [10] Dynamics and path-tracking control of an unmanned bicycle
    Chen, Chih-Keng
    Dao, Thanh-Son
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 6, PTS A-C, 2005, : 2245 - 2254