PEDOT: PSS temperature sensor ink-jet printed on paper substrate

被引：24
|
作者：
Maslik, J. [1 ,2 ]
Andersson, H. [1 ]
Forsberg, V [1 ]
Engholm, M. [1 ]
Zhang, R. [1 ]
Olin, H. [1 ]
机构：
[1] Mid Sweden Univ, Elect Design Div, SE-85170 Sundsvall, Sweden
[2] Tomas Bata Univ Zlin, Univ Inst, Ctr Polymer Syst, Trida Tomase Bati 5678, Zlin 76001, Czech Republic
来源：
JOURNAL OF INSTRUMENTATION | 2018年 / 13卷
关键词：
Detector design and construction technologies and materials; Manufacturing;
D O I：
10.1088/1748-0221/13/12/C12010
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
In this work we present an ink-jet printed temperature sensor consisting of PEDOT:PSS printed on paper suitable for packaging, flexible electronics and other printed applications. The substrate showed to have a large influence on both the resistance as well as the temperature sensitivity of the PEDOT: PSS ink. This effect is most likely due to NaCl content in the photo paper coating, which reacts with the PEDOT: PSS. The temperature coefficient of a prepared device of alpha = -0.030 relative to room temperature (22 degrees C) was measured, which is higher than compared to for example Silicon alpha = -0.075.
引用
收藏
页数：10
相关论文
共 50 条
  • [1] Ink-Jet Printed Strain Sensor on Polyimide Substrate
    Zlebic, Cedo
    Kisic, Milica
    Blaz, Nelu
    Menicanin, Aleksandar
    Kojic, Sanja
    Zivanov, Ljiljana
    Damnjanovic, Mirjana
    [J]. 2013 PROCEEDINGS OF THE 36TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2013, : 409 - 414
  • [2] Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks
    Poldsalu, Inga
    Rohtlaid, Katlin
    Tran Minh Giao Nguyen
    Plesse, Cedric
    Vidal, Frederic
    Khorram, Mahdi Safaei
    Peikolainen, Anna-Liisa
    Tamm, Tarmo
    Kiefer, Rudolf
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2018, 258 : 1072 - 1079
  • [3] XPS investigations of ink-jet printed paper
    Lutzenkirchen-Hecht, Dirk
    Rohrmann, Kay
    Stoecker, Thomas
    Thiel, Wolfgang
    [J]. SURFACE AND INTERFACE ANALYSIS, 2007, 39 (11) : 845 - 851
  • [4] The effects of secondary doping on ink-jet printed PEDOT:PSS gas sensors for VOCs and NO2 detection
    Vigna, L.
    Verna, A.
    Marasso, S. L.
    Sangermano, M.
    D'Angelo, P.
    Pirri, F. C.
    Cocuzza, M.
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2021, 345
  • [5] Fully Ink-Jet Printed Capacitive Pressure Sensor
    Kisic, Milica
    Blaz, Nelu
    Zlebic, Cedo
    Zivanov, Ljiljana
    Nikolic, Ivana
    [J]. 2017 40TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2017,
  • [6] An Ink-Jet Printed Eddy Current Position Sensor
    Jerance, Nikola
    Bednar, Nikola
    Stojanovic, Goran
    [J]. SENSORS, 2013, 13 (04) : 5205 - 5219
  • [7] Evaluation of the Quality of Ink-Jet Printed Paper by Planar Chromatography
    Tadeja Muck
    Ales Hladnik
    [J]. JPC – Journal of Planar Chromatography – Modern TLC, 2003, 16 : 154 - 159
  • [8] Evaluation of the quality of ink-jet printed paper by planar chromatography
    Muck, T
    Hladnik, A
    [J]. JPC-JOURNAL OF PLANAR CHROMATOGRAPHY-MODERN TLC, 2003, 16 (02) : 154 - 159
  • [9] Study on Precision and Uniformity Evaluation Method of PEDOT/PSS Ink-jet Print Film
    Zhou, Yihua
    Qian, Jun
    Yu, Xuemei
    [J]. ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5, 2013, 634-638 : 3840 - 3843
  • [10] Humidity sensor printed on textile with use of ink-jet technology
    Weremczuk, Jerzy
    Tarapata, Grzegorz
    Jachowicz, Ryszard
    [J]. 26TH EUROPEAN CONFERENCE ON SOLID-STATE TRANSDUCERS, EUROSENSOR 2012, 2012, 47 : 1366 - 1369
12345