Development of iso-octane fuel processor system for fuel cell applications

被引:5
|
作者
Moon, Dong Ju [1 ]
Ryu, Jong Woo [1 ]
Yoo, Kye Sang [1 ]
Sung, Dae Jin [1 ]
Lee, Sang Deuk [1 ]
机构
[1] Korea Inst Sci & Technol, Clean Energy Res Ctr, Seoul 130650, South Korea
关键词
iso-octane fuel processor; autothermal reforming (ATR); high temperature shift (HTS); low temperature shift (LTS); iso-octane;
D O I
10.1016/j.cattod.2008.02.022
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
An iso-octane fuel processor system with three different reaction stages, autothermal reforming (ATR) reaction of iso-octane, high temperature shift (HTS) and low temperature shift (LTS) reactions, was developed for applications in a fuel cell system. Catalytic properties of the prepared Ni/Fe/MgO/Al2O3 and Pt-Ni/CeO2 or molybdenum carbide catalysts were compared to those of commercial NiO/CaO/Al2O3 and Cu/Zn/Al2O3 catalysts for ATR and LTS reaction, respectively. It was found that the prepared catalysts formulations in the fuel processor system were more active than those of the commercial catalysts. As the exit gas of iso-octane ATR over the Ni/Fe/MgO/Al2O3 catalyst was passed through Fe3O4-Cr2O3 catalyst for HTS and Mo2C or Pt-Ni/CeO2 catalyst for LTS reaction, the concentration of CO in hydrogen-rich stream was reduced to less than 2400 ppm. The results suggest that the iso-octane fuel processor system with prepared catalysts can be applied to PEMFC system when a preferential partial oxidation reaction is added to KIST iso-octane reformer system. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:222 / 227
页数:6
相关论文
共 50 条
  • [1] Efficiency estimation of solid oxide fuel cell integrated with iso-octane pretreating system
    Tu, Baofeng
    Wang, Xiaojing
    Qi, Huiying
    Qiu, Peng
    Zhang, Tonghuan
    Han, Shuna
    Liu, Di
    Su, Xin
    Cheng, Mojie
    Cui, Daan
    Yin, Yanxia
    [J]. APPLIED THERMAL ENGINEERING, 2024, 236
  • [2] Direct electro-oxidation of iso-octane in a solid electrolyte fuel cell
    Kaklidis, N.
    Pekridis, G.
    Athanasiou, C.
    Marnellos, G. E.
    [J]. SOLID STATE IONICS, 2011, 192 (01) : 435 - 443
  • [3] Development of fuel processor for PE fuel cell system
    Ohhashi, Shigenobu
    Sasaki, Tkashi
    Okano, Tetsuro
    Imada, Noriyuki
    [J]. Zairyo to Kankyo/ Corrosion Engineering, 2002, 51 (12): : 538 - 541
  • [4] Fuel processor development for a soldier-portable fuel cell system
    Palo, DR
    Holladay, JD
    Rozmiarek, RT
    Guzman-Leong, CE
    Wang, Y
    Hu, J
    Chin, YH
    Dagle, RA
    Baker, EG
    [J]. MICROREATION TECHNOLOGY, 2001, : 359 - 367
  • [6] Solid oxide fuel cells operated by internal partial oxidation reforming of iso-octane
    Zhan, ZL
    Barnett, SA
    [J]. JOURNAL OF POWER SOURCES, 2006, 155 (02) : 353 - 357
  • [7] Iso-Octane Internal Reforming in a Solid Oxide Fuel Cell Using Co/CeO2 as Anode
    Al-Musa, A.
    Kyriakou, V.
    Al-Saleh, M.
    Al-Shehri, R.
    Kaklidis, N.
    Marnellos, G. E.
    [J]. HIGH TEMPERATURE EXPERIMENTAL TECHNIQUES AND MEASUREMENTS, 2013, 58 (03): : 131 - 143
  • [8] A micro-structured 5 kW complete fuel processor for iso-octane as hydrogen supply system for mobile auxiliary power units -: Part II -: Development of water-gas shift and preferential oxidation catalysts reactors and assembly of the fuel processor
    Kolb, Gunther
    Baier, Tobias
    Schuerer, Jochen
    Tiemann, David
    Ziogas, Athanassios
    Specchia, Stefania
    Galletti, Camilla
    Germani, Gabriele
    Schuurman, Yves
    [J]. CHEMICAL ENGINEERING JOURNAL, 2008, 138 (1-3) : 474 - 489
  • [9] Comparison of regulated and non-regulated pollutants with iso-octane/butanol and iso-octane/ethanol blends in a port-fuel injection Spark-Ignition engine
    Broustail, G.
    Halter, F.
    Seers, P.
    Moreac, G.
    Mounaim-Rousselle, C.
    [J]. FUEL, 2012, 94 (01) : 251 - 261
  • [10] Thermally integrated fuel processor design for fuel cell applications
    Northrop, William F.
    Choi, Sang Ok
    Thompson, Levi T.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (04) : 3447 - 3458