Multi parameter optimization of deep drawing for cylindrical cup formation on brass sheets using Grey Relational Analysis

被引：5
|
作者：
Ramanjaneyulu, P. [1 ]
Venkataramaiah, P. [2 ]
Reddy, K. Dharma [2 ]
机构：
[1] SVU Coll Engn, Dept Mech Engn, Prod Engn, Tirupati 517502, Andhra Pradesh, India
[2] SVU Coll Engn, Dept Mech Engn, Tirupati 517502, Andhra Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
Deep Drawing; Grey Relational Analysis; Optimization; Punch Force; Thinning Ratio; METAL;
D O I：
10.1016/j.matpr.2019.07.142
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Deep drawing is the widely used process for producing products from sheet metals. There are many effectible process parameters in the process. Proper selection of these parameters leads to sound forming of the components. The aim of the present paper is to analyze the influences of the forming parameters in deep drawing process on the outcomes like drawing force and thinning ratio in cylindrical cup forming of brass sheets. Three Control parameters are considered in the present study such as blank diameter, punch velocity and lubricant with three levels each. The experiment is conducted according Taguchi's DOE methodology and experimental data is analysed by using Taguchi Grey Relational analysis Method for the identification of optimal process parameters. The optimal values are confirmed and found that it is satisfactory. The ANOVA analysis also conducted to determine the influences of control parameters. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2772 / 2778
页数：7
相关论文
共 50 条
  • [1] Optimization of deep drawing process parameters for cylindrical cup
    Sandeep, Manikyam
    MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 772 - 777
  • [2] Parameter Design and Analysis in Friction Welding of Brass Material Using Grey Relational Analysis
    Shanjeevi, C.
    Thamilarasan, J.
    Balaji, N.
    ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 341 - 348
  • [3] Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory
    Kim, JB
    Yoon, JW
    Yang, DY
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2003, 56 (12) : 1673 - 1705
  • [4] Parameter Optimization For Machined Round Parts By Using Grey Relational Analysis
    Hong Zhennan
    Liu Chunbao
    Li Junhong
    2010 INTERNATIONAL COLLOQUIUM ON COMPUTING, COMMUNICATION, CONTROL, AND MANAGEMENT (CCCM2010), VOL II, 2010, : 386 - 389
  • [5] Parameter Optimization for Machined Round Parts by Using Grey Relational Analysis
    Hong Zhennan
    Liu Chunbao
    Li Junhong
    AFFECTIVE COMPUTING AND INTELLIGENT INTERACTION, 2012, 137 : 441 - 448
  • [6] Parametric optimization of electrical discharge machining process on α–β brass using grey relational analysis
    S. Marichamy
    M. Saravanan
    M. Ravichandran
    G. Veerappan
    Journal of Materials Research, 2016, 31 : 2531 - 2537
  • [7] Parametric optimization of electrical discharge machining process on α-β brass using grey relational analysis
    Marichamy, S.
    Saravanan, M.
    Ravichandran, M.
    Veerappan, G.
    JOURNAL OF MATERIALS RESEARCH, 2016, 31 (16) : 2531 - 2537
  • [8] Analysis of wear in deep-drawing process of a cylindrical cup
    Shahani, A. R.
    Salehinia, I.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 200 (1-3) : 451 - 459
  • [9] Research on Grey Relational Analysis of Blasting Parameter Optimization
    Zhen, Wang
    Ang, Li
    2019 2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, INDUSTRIAL MATERIALS AND INDUSTRIAL ELECTRONICS (MEIMIE 2019), 2019, : 12 - 15
  • [10] FSW tool design using TRIZ and parameter optimization using Grey Relational Analysis
    Gadakh, V. S.
    Kumar, A.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6655 - 6664
12345