Effects of Alloying Elements on Mechanical Properties in Hyper-Eutectoid Steel Wires

被引：1

作者：

Lee, Jung Won ^{[1
]}

Kang, Ui Gu ^{[1
]}

Lee, Y. S. ^{[2
]}

Park, K. T. ^{[3
]}

Nam, Won Jong ^{[1
]}

机构：

[1] Kookmin Univ, Dept Adv Mat Engn, Seoul, South Korea

[2] Kookmin Univ, Sch Adv Mech Automot Engn, Seoul, South Korea

[3] Hanbat Univ, Div Adv Mat Sci & Engn, Daejeon, South Korea

来源：

PRICM 7, PTS 1-3 | 2010年 / 654-656卷

关键词：

Annealing; wire drawing; pearlite; cementite; steel; HEAVILY COLD DRAWN; CEMENTITE DISSOLUTION;

D O I：

10.4028/www.scientific.net/MSF.654-656.318

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effects of annealing temperature and silicon content on mechanical properties on cold drawn pearlitic steel wires were investigated. Cold drawn steel wires, containing Si, 0.99 similar to 1.4%, were annealed at the temperature of 200 similar to 450 degrees C with different annealing time. The variation of microstructural evolution with annealing temperature was not affected by silicon content. For steels containing high silicon content above 1.0%, the increase of silicon content did not cause the changes of peak temperature showing age hardening and age softening, except for the increase of tensile strength due to solid solution hardening.

引用

页码：318 / +

页数：2

共 50 条

[1] The Effects of Alloying Elements on Tensile Strength and the Occurrence of Delamination in Cold-Drawn Hyper-Eutectoid Steel Wires
Park, D. B.
Lee, J. W.
Lee, Y. S.
Park, K. T.
Nam, W. J.
[J]. METALS AND MATERIALS INTERNATIONAL, 2009, 15 (02) : 197 - 202
[2] The effects of alloying elements on tensile strength and the occurrence of delamination in cold-drawn hyper-eutectoid steel wires
D. B. Park
J. W. Lee
Y. S. Lee
K. T. Park
W. J. Nam
[J]. Metals and Materials International, 2009, 15 : 197 - 202
[3] Effect of alloying elements on work hardening behavior in cold drawn hyper-eutectoid steel wires
Song, Hyung Rak
Kang, Eui Goo
Nam, Won Jong
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 (1147-1150): : 1147 - 1150
[4] Effects of cementite dissolution on the mechanical properties of the heavily drawn hyper-eutectoid steel wires used for steel cords
Yang, Yo-Sep
Bae, Jong-Gu
Park, Chan-Gyung
[J]. JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2008, 46 (03): : 111 - 117
[5] Effects of drawing strain and annealing on the mechanical properties for heavily cold drawn hyper-eutectoid steel wires
Yang, Y. S.
Bae, J. G.
Park, C. G.
[J]. THERMEC 2006, PTS 1-5, 2007, 539-543 : 4909 - +
[6] Effects of Alloying Elements, Si and Cr, on Aging and Delamination Behaviors in Cold-Drawn and Subsequently Annealed Hyper-eutectoid Steel Wires
Joung, Shinwoong
Nam, Wonjong
[J]. METALS AND MATERIALS INTERNATIONAL, 2019, 25 (01) : 34 - 44
[7] THE EFFECT OF ALLOYING ELEMENTS ON CEMENTITE DISSOLUTION IN HYPER-EUTECTOID STEELS
Luzginova, N. V.
Zhao, L.
Sietsma, J.
[J]. NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS,, 2008, : 731 - +
[8] Effects of Alloying Elements, Si and Cr, on Aging and Delamination Behaviors in Cold-Drawn and Subsequently Annealed Hyper-eutectoid Steel Wires
Shinwoong Joung
Wonjong Nam
[J]. Metals and Materials International, 2019, 25 : 34 - 44
[9] Effects of Manufacturing Conditions on Tensile Fracture Behaviors in Hyper-Eutectoid Steel Wires
An, Kang Suk
Park, Jung Hoon
Nam, Won Jong
[J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2018, 56 (03): : 187 - 196
[10] The effect of a Cr addition and transformation temperature on the mechanical properties of cold drawn hyper-eutectoid steel wires
Song, Hyung Rak
Kang, Eui Goo
Bae, Chul Min
Lee, Choong Yeol
Lee, Duk Lak
Nam, Won Jong
[J]. METALS AND MATERIALS INTERNATIONAL, 2006, 12 (03) : 239 - 243

← 1 2 3 4 5 →