Natural fiber for green technology in automotive industry: A brief review

被引:39
|
作者
Ramli, N. [1 ]
Mazlan, N. [1 ,2 ]
Ando, Y. [3 ]
Leman, Z. [4 ]
Abdan, K. [5 ]
Aziz, A. A. [2 ]
Sairy, N. A. [2 ]
机构
[1] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod INTROP, Lab Biocomposite Technol, Upm Serdang 43400, Selangor, Malaysia
[2] Univ Putra Malaysia, Fac Engn, Dept Aerosp Engn, Upm Serdang 43400, Selangor, Malaysia
[3] Kyushu Inst Technol, Grad Sch Life Sci & Syst Engn, Kitakyushu, Fukuoka, Japan
[4] Univ Putra Malaysia, Fac Engn, Dept Mech & Mfg Engn, Upm Serdang 43400, Selangor, Malaysia
[5] Univ Putra Malaysia, Fac Engn, Dept Biol & Agr Engn, Upm Serdang 43400, Selangor, Malaysia
关键词
REINFORCED COMPOSITES;
D O I
10.1088/1757-899X/368/1/012012
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
Fiber reinforced polymeric composites have been known and widely used because of their high specific strength and modulus compared to metals. In the last few years, biomaterials listed as a demand technology to be exploring by researchers especially in industrial purpose. This is push by environmental awareness and the over use of petrol resources lead to the development of new materials, called biocomposites, which will maintain a better future. This paper will be discussing about a brief review of natural fibers, use in automotive industry to achieve a green technology target in manufacturing of cars specifically. It's a fact that, related to weight reduction, the automotive industry can take advantages of using these materials, not only because of extinction of oil reserve, but because of high ability and importance of these materials itself in automobiles. Currently, most composites in the market are focused with long-term durability design while using nondegradable polymeric resins such as epoxies and high-strength fiber such as glass. All these materials prove to be a good characteristic of composite but still lack in environmental concern. This polymer and fiber are derived from petroleum, a nonreplenishable commodity. The momentum is to use biocomposites in common plastics to improve performance. Since the main purpose of this paper is to show a bio-composite which is suitable to replace the existing interior of automotive design, the work has focused on obtaining that bio-composite, taking account into the raw-materials cost reduction and the maintenance of the manufacturing process based on current scenario. The automotive industry is in their way to expand green technology in composites because the need is greatest. But producing the composites is energy intensive and polluting, while the durability of conventional composites, often seen as an advantage, is also their biggest challenge. Current fibers use in industry right now is difficult to dispose. They do not degrade naturally and could linger for generations.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] Natural fiber composites in the European automotive industry
    Kenny, JM
    [J]. 6TH INTERNATIONAL CONFERENCE ON WOODFIBER-PLASTIC COMPOSITES, 2002, : 9 - 12
  • [2] A review of carbon fiber materials in automotive industry
    Ahmad, H.
    Markina, A. A.
    Porotnikov, M., V
    Ahmad, F.
    [J]. INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE) 2020, 2020, 971
  • [3] What is stopping the automotive industry from going green? A systematic review of barriers to green innovation in the automotive industry
    Gohoungodji, Paulin
    N'Dri, Amoin Bernadine
    Latulippe, Jean-Michel
    Matos, Adriana Leiria Barreto
    [J]. JOURNAL OF CLEANER PRODUCTION, 2020, 277
  • [4] A review on the Uses of Natural Fibers in Automotive Industry
    Cavdar, Ayfer Donmez
    Boran, Sevda
    [J]. KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, 2016, 16 (01): : 253 - 263
  • [5] Review of the green inhibitors for steel corrosion in automotive industry
    Chami, A.
    Benabbou, R.
    Taleb, M.
    Rais, Z.
    El Haji, M.
    [J]. Journal of Corrosion Science and Engineering, 2021, 23
  • [6] The prospects of natural fiber composites: A brief review
    Palanisamy, Sivasubramanian
    Vijayananth, Kavimani
    Murugesan, Thulasi Mani
    Palaniappan, Murugesan
    Santulli, Carlo
    [J]. International Journal of Lightweight Materials and Manufacture, 2024, 7 (04) : 496 - 506
  • [7] Prospects of laser welding technology in the automotive industry: A review
    Hong, Kyung-Min
    Shin, Yung C.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 245 : 46 - 69
  • [8] Natural fibre composites - an alternative to plastics in the automotive industry: A review
    Babu, T. Narendiranath
    Shyam, Suraj
    Kaul, Shivam
    Prabha, D. Rama
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2022, 236 (02) : 237 - 266
  • [9] Micro-/Nano-technology in the Automotive Industry: A Review
    Kanakasabapathi Subramanian
    Vijay Bhooshan Kumar
    [J]. Transactions of the Indian National Academy of Engineering, 2024, 9 (2) : 323 - 334
  • [10] A Review of Current Development in Natural Fiber Composites in Automotive Applications
    Norhidayah, M. H.
    Hambali, A.
    Yuhazri, Y. Mohd
    Zolkarnain, M.
    Taufik
    Saifuddin, H. Y.
    [J]. ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 3 - 7