System identification applied to stiction quantification in industrial control loops: A comparative study

A comparative study of different models and identification techniques applied to the quantification of valve stiction in industrial control loops is presented in this paper, with the objective of taking into account for the presence of external disturbances. A Hammerstein system is used to model the controlled process (linear block) and the sticky valve (nonlinear block): five different candidates for the linear block and two different candidates for the nonlinear block are evaluated and compared. Two of the five linear models include a nonstationary disturbance term that is estimated along with the input-to-output model, and these extended models are meant to cope with situations in which significant nonzero mean disturbances affect the collected data. The comparison of the different models and identification methods is carried out thoroughly in three steps: simulation, application to pilot plant data and application to industrial loops. In the first two cases (simulation and pilot plant) the specific source of fault (stiction with/without external disturbances) is known and hence a validation of each candidate can be carried out more easily. Nonetheless, each fault case considered in the previous two steps has been found in the application to a large number of datasets collected from industrial loops, and hence the merits and limitations of each candidate have been confirmed. As a result of this study, extended models are proved to be effective when large, time varying disturbances affect the system, whereas conventional (stationary) noise models are more effective elsewhere. (C) 2016 Elsevier Ltd. All rights reserved.