Numerical Die Life Estimation of a Crack Susceptible Industrial Hot Forging Process

被引：1
|
作者：
Bouguecha, A. [1 ]
Behrens, B. -A. [1 ]
Bonk, C. [1 ]
Rosenbusch, D. [1 ]
Kazhai, M. [1 ]
机构：
[1] Inst Forming Technol & Machines IFUM Hannover, Univ 2, D-30823 Garbsen, Germany
来源：
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) | 2017年 / 1896卷
关键词：
FEA; fatigue life; crack initiation; hot forging; die life estimation;
D O I：
10.1063/1.5008225
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In industrial hot forging processes, the forging dies underlie cyclic thermo-mechanical loads, which can lead to failure of the tools. Besides die wear (abrasive and adhesive) on the surface, fatigue crack initiation with a following fracture of the tool is one of the most frequent failures occurring in hot forging processes. In this study an industrial hot forging process is considered for fatigue analysis. Tool geometry is designed for a defined life time until crack initiated failure of the tool. Material characterization tests in form of tensile tests as well as cylindrical compression tests and low cycle fatigue tests were carried out. The data will be implemented in a commercial software-system to realize a qualitative good prediction of die life regarding crack wiation.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Estimation of die service life for a die cooling method in a hot forging process
    Kim, DH
    Kim, BM
    Kang, CG
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 27 (1-2): : 33 - 39
  • [2] Estimation of die service life for a die cooling method in a hot forging process
    Kim, B.M. (bmkim@pusan.ac.kr), 1600, Springer-Verlag London Ltd (27): : 1 - 2
  • [3] Estimation of die service life for a die cooling method in a hot forging process
    D.H. Kim
    B.M. Kim
    C.G. Kang
    The International Journal of Advanced Manufacturing Technology, 2005, 27 : 33 - 39
  • [4] A study on life estimation of hot forging die
    Yohng-Jo Kim
    Chang-Hyok Choi
    International Journal of Precision Engineering and Manufacturing, 2009, 10 : 105 - 113
  • [5] A study on life estimation of hot forging die
    Kim, Yohng-Jo
    Choi, Chang-Hyok
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2009, 10 (03): : 105 - 113
  • [6] Analysis and Improvement of an Industrial Process of Hot Die Forging of an Elongated Forging Tipped with a Joggle with the Use of Numerical Simulation Results
    Hawryluk, Marek R.
    Rychlik, Marcin
    Polak, Slawomir
    Zwierzchowski, Maciej
    Dudkiewicz, Lukasz
    Marzec, Jan
    Jablonski, Pawel
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2023, 17 (02) : 192 - 205
  • [7] Application of numerical simulation for the estimation of die life after repeated hot forging work cycles
    D'Addona, Doriana M.
    Antonelli, Dario
    12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 2019, 79 : 632 - 637
  • [8] Analysis of the destruction of a die insert used in the industrial process of hot die forging to produce a yoke forging
    Hawryluk, Marek
    Dudkiewicz, Lukasz
    Jablonska, Magdalena
    Polak, Slawomir
    Marzec, Jan
    ENGINEERING FAILURE ANALYSIS, 2024, 164
  • [9] Estimation of die service life in hot forging, considering lubricants and surface treatments
    Lee, HC
    Kim, BM
    Kim, KH
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (07) : 1011 - 1022
  • [10] Influence of design and process parameters on service life of nut hot forging die
    Garat, V
    Bernhart, G
    Hervy, L
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (03) : 359 - 369
12345